LPS Instruction Manual - HygroMatik
LPS Instruction Manual - HygroMatik
LPS Instruction Manual - HygroMatik
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The completed finished hose connection should look like this:Manifold - Pump StationIn the standard version a 6/4 hose leads from the pump stationto a manifold. However, if the <strong>LPS</strong> nozzle system is equippedwith a partial/full load switch, then there is a 6/4 hose line leadingto two manifolds.Since the 6/4 hose line goes through the air conditioning duct aduct wall grommet is provided (or two in the case of a partial/fullload switch).Page 28