LPS Instruction Manual - HygroMatik

7.3.4 Assembling of the side rails for the vortexmodule wallVortex module walls consisting of 11 or more vortex modulerows are automatically equipped with side rails and self-tappingscrews.The side rails have to be adapted to the right lenght by theinstaller. The required lenght is the distance between the middleof the lowest and the middle of the top vortex module.The side rail is an u-section and made of stainless steel. It is1.5mm thick. For the assembling the open side of the u-sectionhas to be attached to the latteral edge of the vortex module wall(pos. 3). The lower end of the side rail is positioned in the middleof the lowest vortex module. The lowest drilling (pos. 2) of theside rail is used to screw in a self-tapping screw (M3.9X20). Asecond self-tapping screw is used for the upper end of the siderail.The side rail for the other side of the vortex module wall has tobe assembled in the same way.123Page 24