LPS Instruction Manual - HygroMatik

7.7 Checking the installationAssembling the vortex module wall Have all electrical cable and plug connections beenproperly tightened?Is the vortex module wall in accordancewith the nozzle arrangement data sheet? (pleasenote the number of modules in width and height)?Vortex module wall assembly Have all electrical cable and plug connections beenproperly tightened?Are the guide rails built so that thevortex wall module can be lifted or slid from the guiderails? Is it ensured after assembly that the floor pan is showingno leaks? Have all electrical cable and plug connections beenproperly tightened?With a wall height of 11 modules isthe Vortex-Vortex-module supported by two side rails.With16 Vortex modules is it vertically split and supportedindividually by side rails?Droplet separator assembly Are the guide rails built so that separator can be lifted orslid from the guide rails? Is it ensured after assembly that the floor pan is showingno leaks? Are all electrical plug connectionssecure?Mounting of the distributor pipe / tubing Has the seating of the individual hoses on their connectorsbeen checked by pulling gently on them? Are allelectrical plug connections secure? Is the arrangement of the nozzles and tubing in accordancewith to the supplied nozzle arrangement datasheet?Pump station installation Is the pump station fixed horizontally on a suitable wall?Does the mains voltage match the voltage on the nameplate/delivery note?Page 36