32 CHANNEL 64 CHANNEL NVR - Samsung CCTV

Press the ∧, ∨ buttons to select numbers (0~9), space, and period (.); press the buttons to move between digits. Once you have finished entering the IP address, pressEnter.Subnet Mask0.0.0.0Gateway0.0.0.0DNS1 Server IP192.168.1.1Enter the Subnet Mask, Gateway, and DNS Server 1 address the same way.Confirm IP Setup?Yes: Enter No: EscPressing Enter moves to the next screen, as the IP address for Monitor Ethernet Port isbeing saved. To move back to the previous phase, press ESC. To cancel the new settingsand move back to the main screen, hold down ESC for 2 seconds or longer.IP Setup[DONE]Note• The DNS1 address can be set under Monitor Ethernet Port Port > Static IP.The DNS 2 address is under Source Port > Static IP. Once set, these DNSservers are used by all ports.• DNS1 is used as the default, and DNS2 is the backup. DHCP Client SetupPress ∧ and ∨ to select 2. Use DHCP (Client), and then press Enter.Use DHCP Client?Yes: Enter No: EscPressing Enter moves to the next screen, as Monitor Ethernet Port is updated to use DHCP.To move back to the previous phase, press ESC. To cancel the new settings and moveback to the main screen, hold down ESC for 2 seconds or longer.Client Mode Setup[DONE]83