B-SX600 SERIES - Finn-ID

3. PRINTER OPERATION USING THE OPERATION PANEL EO13-330063. PRINTER OPERATION USING THE OPERATION PANEL3. PRINTER OPERATION USING THE OPERATIONPANELThe printer can be operated from the Operation Panel.OperationSwitching the printer betweenpause mode and ready modeFeeding a single page or labelStopping the buzzer soundClearing print data stored in theprinterSwitching the message from “Error”to “Pause” on the LCDEnabling or disabling the [Menu]keyDisplaying the Menu optionsCutting the media(Only for the model with the CutterUnit)Operation proceduresPress the [Pause] key.Press the [Feed] key.(The media is fed continuously while the [Feed] key is being helddown.)Press any of the keys on the Operation Panel.Hold down the [Cancel] key until the Data LED goes out.(After clearing print data, make sure that the Data LED is off beforeinitiating a print job.)Press the [Cancel] key.Hold down the [Menu] key.Press the [Menu] key.(Enable the [Menu] button if disabled. Then press it again.)Hold down the [▼] key.3-1