Retriever IV Fraction Collector User Manual - Isco

DECLARATION OF CONFORMITYApplication of Council Directive: 89/336/EEC – The EMC Directive73/23/EEC – The Low Voltage DirectiveManufacturer's Name: Teledyne Isco, Inc.Manufacturer's Address: 4700 Superior, Lincoln, Nebraska 68504 USAMailing Address: P.O. Box 82531, Lincoln, NE 68501Equipment Type/Environment: Laboratory Equipment for Light Industrial/Commercial EnvironmentsTrade Name/Model No: Retriever IV Fraction Collector/RTRV IVYear of Issue: 2000Standards to which Conformity is Declared: EN 61326-1998 EMC Requirements for Electrical Equipment forMeasurement, Control, and Laboratory UseEN 61010-1 Safety Requirements for Electrical Equipment for Measurement,Control, and Laboratory UseStandard Description Severity Applied Performance CriteriaEN61000-4-2 Electrostatic Discharge Level 2 - 4kV contact dischargeLevel 2 - 4kV air dischargeEN61000-4-3 Radiated RF Immunity 80 MHz to 1000MHz 80% AM at 1kHzLevel 1 - 3V/mEN61000-4-4 Electrical Fast Transient Level 2 - 1kV on ac lines BEN61000-4-5 Surge on AC Lines 1kV common mode,500V differential modeEN61000-4-6 Conducted RF on AC lines 150 kHz to 80 MHz,3V rms, 80% modulatedEN61000-4-11 Voltage Dips/Short Interruptions 0.5 cycle, each polarity/100% BCISPR11/EN 55011RF EmissionsEN61000-3-2, 3-3 Harmonic Flicker Group 1, Class AGroup 1, Class A Industrial, Scientific, andMedical EquipmentBBABBWe, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) andStandards as of April 4, 2000.William FosterUSA RepresentativeWilliam FosterDirector of EngineeringTeledyne Isco, Inc.4700 Superior StreetLincoln, Nebraska 68504Phone: (402) 464-0231Fax: (402) 464-454360-2262-017Rev D