Bosch Video Management System - Bosch Security Systems

Bosch Video Management System Troubleshooting | en 6914.2 Fixing the recording setting for Intercom functionalityTo fix the recording setting:1. Start Operator Client.2. View the newest Operator Client log file:C:\Documents and Settings\All Users\ApplicationData\Bosch\VMS\Log\BvmsClientLog.*3. Look for a line like the following:2007-09-26 15:39:56,442 26036 [GUI Thread] INFOBosch.Vms.Dvs.VideoSDK.EntryPoint CreateLocalAudioSource - audioSourceinputNr 1 has the name 'Microphone'The number for the microphone entry can be different on your system.Note this number, in this example it is the number 1.4. Edit the Operator Client configuration file:C:\\Bosch\VMS\bin\OperatorClient.exe.config5. Look for a line like the following:If the number for the microphone differs from the number found in the log file, changethe number here to the number in the log file. In this example, change to number 1.6. Restart Operator Client.Now the microphone is used as input source.14.3 Restoring a system configurationYou can restore a system configuration using the exported configuration data and user data.To restore:1. Stop Central Server service and all NVR services.2. Unzip the .zip file.3. Replace the elements.bvms by the export.bvms.4. Replace the UserData folder by the contents of the unzipped UserData folder.5. Delete all NVR.elements.bvms at all NVR instances.6. Start the Central Server service and all NVR services.Further configuration files:– Elements.bvms.bak (from V.2.2 on): Backup file before the last activation incl. history– Elements_Backup******.bvms: Configuration from an older version. Will be createdafter a software update.Bosch Sicherheitssysteme GmbH Operation Manual Operation Client | V4 | 2010.12