Bosch Video Management System - Bosch Security Systems

80 en | Glossary Bosch Video Management SystemSNTPSSLSimple Network Time Protocol is a simplified version of NTP (see NTP). SNTP can be usedwhen the ultimate performance of the full NTP implementation described in RFC 1305 is notneeded or justified. SNTP version 4 is described in RFC 2030 (see RFC).Secure Sockets Layer. Protocol used to secure applications that need to communicate over anetwork.Subnet mask numberCombined with the IP address number used to identify the network segment your computer ison. A subnet mask is a 32-bit number written in dotted decimal notation, e.g.255.255.255.192.Synchronous replaySimultaneous playback of archived videos that are synchronized in time.TTaskTask ScheduleTCP/IPTimelineTrapTrunk lineUser-programmed behavior that is triggered by specific events (motion detected, doorbellrung, alarm triggered, etc.) Tasks can be: Control of PTZ cameras, relay outputs, camerasequences, start of an alarm recording. Typical tasks are for example: An event triggers analarm; event executes a Command Script; event is logged; user login is allowed only from 8a.m. to 5 p.m; execution of a Command Script at 11 p.m.Used for scheduling events which can occur in Bosch Video Management System, for exampleexecuting a Command Script. In Events you assign Task Schedules to events. For schedulingevents you can also use Recording Schedules. With a standard Task Schedule you configuretime periods for every day of the week, for holidays, and for exception days. With a recurringTask Schedule you configure recurring time periods. They can recur every day, every week,every month, or every year.Transmission Control Protocol / Internet Protocol. Connection-oriented protocol used totransmit data over an IP network.Part of the Bosch Video Management System user interface. Displays lines as graphicalrepresentations of the recordings of the selected cameras. The Timeline allows you tonavigate through recorded videos.Term in the SNMP environment for an unrequested message from a monitored device (agent)to the network monitoring system (manager) about an event in this device.Analog outputs of an analog matrix that are connected to an encoder device. Thereby matrixvideo sources can be used in the Bosch Video Management System.UUDPUnicastUser groupUser Datagram Protocol. A connection less protocol used to exchange data over an IPnetwork. UDP is more efficient than TCP for video transmission because of lower overhead.Communication between a single transceiver and a single receiver over a network.User groups are used to define common user attributes, such as permissions, privileges andPTZ priority. By becoming a member of a group, a user automatically inherits all the attributesof the group.Operation Client | V4 | 2010.12 Operation Manual Bosch Sicherheitssysteme GmbH