968 Spectrophotometer Operation Manual ***discontinued ... - X-Rite

User InterfaceThis section will familiarize you with the typographical conventions, displayfunctions, and general terms used in this manual.• In the text portion of this manual the 968 keys are shown with brackets onboth sides and in boldface. Ex., [FUNCTION], [ILLUM], and [DIF].• When a key is to be momentarily pressed, the statement "press" will be used.Ex., Press [FUNCTION].• When a key is to be held depressed until another action occurs, the statement"hold down" will be used. Ex., Hold down [ILLUM] until "SELECTILLUMINANT" is displayed.• Information that will appear in the displaywindow will be shown with quotationmarks on each side and in boldface. Ex.,"SELECT ILLUMINANT"SELECTILLUMINANTFUNCTION ILLUM DIFCAL• The symbols ▼ and ▲ represent theblue and red arrows on the 968. Incalibration and reference value entry thearrows indicate which direction a valuecan be changed. Holding [DIF] depressedand pressing [▼ ] decreases the value and[▲ ] increases the value.X Y Z C2 X 4 . 1 2Y 2 . 8 7 Z 2 . 4 1FUNCTION ILLUM DIFCAL• The term "cursor" represents a blackrectangle that will blink next to or over avalue or function in the display. In mostcases it means that value is active and canbe altered via the [▼] and [▲] keys.• A "hand" indicates important notes andpossible operations that need to beperformed before the normal operation.• When a procedure is continued on the nextpage an arrow will appear in the bottomright hand corner of the page.WHTx . 3 0 9 0C 2CURSORY 8 5 . 5 5y . 3 1 8 1• Illuminant/observer combinations are expressed by special notations (Ex.,D65 2 indicates illuminant D, 6500°k, and 2° observer).vi