968 Spectrophotometer Operation Manual ***discontinued ... - X-Rite

More documents

Recommendations

Info

Example 2 - Measuring a Coffee CupCoffee CupJigCORRECTExample 3 - Measuring a SmallJigKnobCORRECT6
3. <strong>Operation</strong>3.1 Key DescriptionsFUNCTION ILLUM DIFCAL[FUNCTION]/[▼]• Selects the function that will be used for measurement. Eachmomentary depression will cause the display to page through XYZ,Yxy, L*a*b*, L*u*v*, L*C*h°, Whiteness, & Yellowness.• Decreases numeric values when used with the [DIF] key duringentry of reference or calibration values.• Selects Calibration when pressed with [ILLUM] key.• Selects various steps when in system setup procedures.[ILLUM]/[▲]• When held depressed activates illuminant/observer selection,thereafter, momentary depressions select the illuminant to beused. The available illuminants are:See Section3.24.04.05.03.3CAF2F7D 65 D 507F11F12Note: the [DIF] key selects the Observer (CIE 1931 2° or CIE 196410°) to be used.• Increases numeric values when used with [DIF] key during entryof reference or calibration values.• Displays the reference number when pressed momentarily.• Selects Calibrate when pressed with the [FUNCTION] key.[DIF]/[▼▲]• When at function level, toggles Delta (∆) On and Off with eachdepression. Delta being the difference mode.• Decreases reference or calibration values when used with the[FUNCTION] key.• Increases numeric values when used with the [ILLUM] key.4.03.54.03.54.04.0
Page 2 and 3: CAUTION: Operational hazard exists
Page 4 and 5: FCCThis equipment has been tested a
Page 6 and 7: Dear Customer:Congratulations! We a
Page 8 and 9: PROPRIETARY NOTICE: The information
Page 10 and 11: General Description . . . continued
Page 12 and 13: What To Do First!See how to unlock
Page 14 and 15: PACKAGING2
Page 16 and 17: 1.3 Battery Charging> THE UNIT SHOU
Page 21 and 22: The illuminant/observer will not be
Page 23 and 24: Illuminant/Observer Selection...con
Page 25 and 26: 3.5 Difference MeasurementThe 948 a
Page 27 and 28: Entry of Reference values - By meas
Page 29 and 30: Entry of Reference values - By Nume
Page 31 and 32: 3.6 CMC Difference OperationCMC is
Page 33 and 34: 3.7Measurement Averaging ProcedureW
Page 35 and 36: 3.8 Store Data OperationThe data st
Page 37 and 38: Store Data Operation . . . continue
Page 39 and 40: Display Messages . . . continued"CA
Page 41 and 42: 4.1 Positioning the 968 Onto the X-
Page 43 and 44: X-Rite Reflection StandardX-RiteRef
Page 45 and 46: Calibrating to a White Standard . .
Page 47 and 48: 5. Setting System Parameters5.1 Ave
Page 49 and 50: 5.2 Operation ParametersOperation s
Page 51 and 52: 5.3 RS232 I/O ParametersYour instru
Page 53 and 54: 5.4 Format Output ParametersThis pr
Page 55 and 56: 6. Printing DataThe RS232 parameter
Page 57 and 58: Print Example 2:• Computer ON•
Page 59 and 60: 7. Changing AperturesX-Rite has thr
Page 61 and 62: 8. Maintenance8.1. TroubleshootingT
Page 63 and 64: 8.3. Battery Replacement1. Set the
Page 65 and 66: 8.5. Lamp ReplacementDue to the cir
Page 67 and 68: Specifications . . . continuedStora
Page 69 and 70:
A4Spectrophotometer StandX-Rite has
Page 71 and 72:
Color Check . . . continued7) After
Page 73:
X-Rite, Incorporated----World Headq
show all

968 Spectrophotometer Operation Manual ***discontinued ... - X-Rite

Create successful ePaper yourself

Delete template?

Save as template?