User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS

More documents

Recommendations

Info

$Abbemat Refractometer Se$

6.3 TEST: GeneralScreen Instructions (Diagram 8):1. Tap the TEST tab at the bottom of the page2. Select desired UUT ID from the drop down box at the top of the page.If desired UUT is not there, see section on creating a new UUT.3. View the PROFILE ID drop down box and confirm that profile selectedis the desired pressure test profile, if not, select desired profile fromdrop down list.4. Select AS FOUND or AS LEFT radio button.5. Tap TARE and wait until completed. This zeroes the ref. unit.6. Tap DO TEST button.7. To stop a test in process, tap the STOP button. This will stop andcancel the test.8. Target pressure will be generated and data will be automaticallyrecorded at each pressure point.Note: If the Display Test Results in Graph Option is selected (see Edit Defaultspage) - a graph will appear displaying pressure vs. error after the pressuresequence has been completed (Diagram 9).9. To record data - Tap RECORD TEST RESULTS buttonNote: Record Test Results Button has 3 states indicating the save status of testresults. When no test results are available to save, the button reads “No ResultsTo Save.” When results on screen have been saved, the button will change to“Test Results Saved.” After a test is complete and before the data is saved, thebutton will read “Record Test Results.”10. To review data - Tap REVIEW TEST RESULTS button11. To expand/collapse the Test Profile/Results window, double tap TestProfile / Results window.Unit Under Test(UUT) IdentityProfile IDDo TestRecord DataReview DataTest Profile/Results WindowStopRe-ZeroAs Found/As LeftTest SelectionTarget PressureTest TabDiagram 814
Diagram 96.31 TEST: Dial GaugeDifferences from General (Diagrams 8 & 9):-Pressing DO TEST button brings up separate test page with dither control(Diagram 10).-Output columns removed from Test Profile/Results window.6.32 TEST: P-SwitchDifferences from General (Diagrams 8 & 9):-Pressing DO TEST button brings up separate test page with dither control(See 6.33 Dither Control Page, Diagram 10).-Output columns removed from Test Profile/Results window.-O/C column added to indicate the state of the pressure switch.O - OpenC - Closed15
Page 1: User ManualMicro-CalModel 869Very L
Page 4 and 5: 9.0 MICRO-CAL MANAGER INTERFACE9.1
Page 6 and 7: 2.0 INTRODUCTIONDOCUMENTING PROCESS
Page 8 and 9: 4.0 OPERATING FEATURES4.1 THE POCKE
Page 10 and 11: 5.3 USER INTERFACE PANELThe user in
Page 12 and 13: 6.0 POCKET PC INTERFACE SCREENSThe
Page 16 and 17: 6.33 TEST: Dither Control Page (Man
Page 18 and 19: 6.4 PROFILE: GeneralSetting up Test
Page 20 and 21: 6.5 UUT (UNIT UNDER TEST) SETUP: Ge
Page 22 and 23: UUT SUPPLEMENTAL PAGE1. Enter the U
Page 24 and 25: 6.51 UUT (UNIT UNDER TEST) SETUP: D
Page 26 and 27: 6.7 SYSTEMScreen Instructions (Diag
Page 28 and 29: EDIT DEFAULTS PAGEDisplay trend gra
Page 30 and 31: ENGINEERING UNITS SCREENThis page i
Page 32 and 33: Standard 869Unit Under Test(Model 2
Page 34 and 35: 9.0 MICRO-CAL MANAGER INTERFACEThe
Page 36 and 37: Pocket PC Database - This list show
Page 38 and 39: New Button - This button opens a di
Page 40 and 41: Once a UUT ID is selected, the test
Page 42 and 43: 10.0 GLOSSARY OF TERMSAtmospheric P
Page 44 and 45: 12.0 SPECIFICATION DERIVATIONSTotal
Page 47 and 48: Non-LinearityRelationship of a cali
Page 49: 14.0 WARRANTY & LIMITATION OF LIABI

User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS

Create successful ePaper yourself

Delete template?

Save as template?

User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS