User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS

More documents

Recommendations

Info

$Abbemat Refractometer Se$

6.33 TEST: Dither Control Page (Manual Pressure Incrementing)Screen Instructions (Diagram 10):Test Point Indicator: Displays present test point number.Target Pressure: Displays present test point target pressure.Eng Units Display: Displays pressure units.Pressure Display Window: Displays present pressure during test.OPEN/CLOSE Indicator: Available only with P-Switch, indicates open/closed status of switch.Take Data Button: Forces data collection for Dial Gauge. Tells softwarethat the UUT is indicating the present target pressure.Vent Button: Stops the test in progress and vents 869 pressure ports toatmosphere.Halt: Pauses pressure control. Leaves system closed to allow for quickre-acquisition of target pressure.Set Point Window: Displays present set point for the 869 pressurecontroller. Updates when test point number is changed, or when +/- dithercontrols are used. Also, allows user entry.GO Button: Updates pressure target within 869 to that displayed in the setpoint window. Starts pressure control.- FINE Button: Decreases pressure set point by 0.1% of UUT span.+ FINE Button: Increases pressure set point by 0.1% of UUT span.- COARSE: Decreases pressure set point by 1% of UUT span.+ COARSE: Increases pressure set point by 1% of UUT span.Cancel Button: Stops test in progress and dumps any data taken.Leaves unit in vented state.Test TypeTest Point IndicatorTarget PressureEng. Units DisplayPressure Display WindowOPEN/CLOSED Indicator(P-Switch Only)Set Point Window- FINE Button- COARSE ButtonTargetTake Data ButtonVent ButtonHalt ButtonGO Button+ FINE Button+ COARSE ButtonCancel ButtonDiagram 1016
6.34 TEST: Expert SystemDifferences from General (Diagrams 8 & 9):-Automatically starts test in “As Found” condition; records “As Found” data-Automatically performs recal if “As Found” data is found to be outsidelimits on UUT page-Performs recal maximum of three tries before flagging UUT as “No Recal”-Records successful recal “As Left”-Test data available as “As Found” and “As Left” data pair17
Page 1: User ManualMicro-CalModel 869Very L
Page 4 and 5: 9.0 MICRO-CAL MANAGER INTERFACE9.1
Page 6 and 7: 2.0 INTRODUCTIONDOCUMENTING PROCESS
Page 8 and 9: 4.0 OPERATING FEATURES4.1 THE POCKE
Page 10 and 11: 5.3 USER INTERFACE PANELThe user in
Page 12 and 13: 6.0 POCKET PC INTERFACE SCREENSThe
Page 14 and 15: 6.3 TEST: GeneralScreen Instruction
Page 18 and 19: 6.4 PROFILE: GeneralSetting up Test
Page 20 and 21: 6.5 UUT (UNIT UNDER TEST) SETUP: Ge
Page 22 and 23: UUT SUPPLEMENTAL PAGE1. Enter the U
Page 24 and 25: 6.51 UUT (UNIT UNDER TEST) SETUP: D
Page 26 and 27: 6.7 SYSTEMScreen Instructions (Diag
Page 28 and 29: EDIT DEFAULTS PAGEDisplay trend gra
Page 30 and 31: ENGINEERING UNITS SCREENThis page i
Page 32 and 33: Standard 869Unit Under Test(Model 2
Page 34 and 35: 9.0 MICRO-CAL MANAGER INTERFACEThe
Page 36 and 37: Pocket PC Database - This list show
Page 38 and 39: New Button - This button opens a di
Page 40 and 41: Once a UUT ID is selected, the test
Page 42 and 43: 10.0 GLOSSARY OF TERMSAtmospheric P
Page 44 and 45: 12.0 SPECIFICATION DERIVATIONSTotal
Page 47 and 48: Non-LinearityRelationship of a cali
Page 49: 14.0 WARRANTY & LIMITATION OF LIABI

User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS