User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS

More documents

Recommendations

Info

$Abbemat Refractometer Se$

UUT SUPPLEMENTAL PAGE1. Enter the UUT Part Number.2. Enter the UUT Model.3. Enter the UUT Manufacturer.4. Enter the required pressure Settling Time at target (in milliseconds,99,999 max. and 0 min, 5,000 recommended.) Pressure settling timeis time allowed at pressure point before data is acquired.5. ENTER MAXIMUM LEAK RATE in box. This is PASS/FAIL criteria forleak check function, measured in change of pressure per second.6. Enter the required pressure stability for data acquisition in the ControlStability field.7. Enter the System Volume value (cu. in.). 64 is default. To increasespeed of pressure control, increase this value. The softwareautomatically programs this value based on testing performed at Setra.It is recommended that the preprogrammed values always be used.8. To accept the changes made, tap OK. To reject the changes made, tapCancel.22
UUTPart NumberUUT ModelUUTManufacturerSetting Timefor Data Acq.Max. Leak RateAllowablefor Pass/FailAdjust PressureControl SensitivityPressure StabilityRequired for DataAcquisitionAccept ChangesCancel andReject ChangesDiagram 1423
Page 1: User ManualMicro-CalModel 869Very L
Page 4 and 5: 9.0 MICRO-CAL MANAGER INTERFACE9.1
Page 6 and 7: 2.0 INTRODUCTIONDOCUMENTING PROCESS
Page 8 and 9: 4.0 OPERATING FEATURES4.1 THE POCKE
Page 10 and 11: 5.3 USER INTERFACE PANELThe user in
Page 12 and 13: 6.0 POCKET PC INTERFACE SCREENSThe
Page 14 and 15: 6.3 TEST: GeneralScreen Instruction
Page 16 and 17: 6.33 TEST: Dither Control Page (Man
Page 18 and 19: 6.4 PROFILE: GeneralSetting up Test
Page 20 and 21: 6.5 UUT (UNIT UNDER TEST) SETUP: Ge
Page 24 and 25: 6.51 UUT (UNIT UNDER TEST) SETUP: D
Page 26 and 27: 6.7 SYSTEMScreen Instructions (Diag
Page 28 and 29: EDIT DEFAULTS PAGEDisplay trend gra
Page 30 and 31: ENGINEERING UNITS SCREENThis page i
Page 32 and 33: Standard 869Unit Under Test(Model 2
Page 34 and 35: 9.0 MICRO-CAL MANAGER INTERFACEThe
Page 36 and 37: Pocket PC Database - This list show
Page 38 and 39: New Button - This button opens a di
Page 40 and 41: Once a UUT ID is selected, the test
Page 42 and 43: 10.0 GLOSSARY OF TERMSAtmospheric P
Page 44 and 45: 12.0 SPECIFICATION DERIVATIONSTotal
Page 47 and 48: Non-LinearityRelationship of a cali
Page 49: 14.0 WARRANTY & LIMITATION OF LIABI

User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS