User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS

More documents

Recommendations

Info

$Abbemat Refractometer Se$

6.7 SYSTEMScreen Instructions (Diagram 17):Data and system values:Software Version - Version of software on Pocket PC.Firmware Version - Version of firmware on calibrator microprocessorboard.Serial Number - Serial number of device.Next Calibration Due Date - Calibration due date set at factory whencalibrated - set for one year after latest calibration.Current Date - System Date/Time Display - This must be set throughPocket PC settings. Date should be set accurately to notify operators ofupcoming calibration due date.Filter Length - The number of samples taken when a data point iscollected during an automated test. It is also the number of samplestaken when HOLD SAMPLE button is pressed on Real Time page. Thesoftware will read this number of samples and return the average as thedata value.Excitation - This value is the current excitation being provided to +EXC.Battery Level - This value is the current battery voltage level.Comm On - Check box allows interruption of communication streambetween Pocket PC and 869 base. This allows Pocket PC to be removedfrom base and still allow UUT, test profile, and system configurationchanges. Disabling Comm. prevents testing and calibration from beingperformed.Edit Defaults - Brings up default settings page.(for more, see Diagram 18, pg. 28)Engineering Units - Opens the Engineering Units Selection Page (formore, see Diagram 20, pg.30)Leak Test System- Initiates leak test (pressure decay test) function.This function should only be performed in a closed system.The number returned is a rate of pressure decay.26
Software VersionFirmware VersionSerial NumberFilter LengthCommunicationOn/Off SelectorNext CalibrationDue DateCurrent DateDefault SystemSettingEng. Units SettingLeak Test SystemExcitationBattery LevelDiagram 1727
Page 1: User ManualMicro-CalModel 869Very L
Page 4 and 5: 9.0 MICRO-CAL MANAGER INTERFACE9.1
Page 6 and 7: 2.0 INTRODUCTIONDOCUMENTING PROCESS
Page 8 and 9: 4.0 OPERATING FEATURES4.1 THE POCKE
Page 10 and 11: 5.3 USER INTERFACE PANELThe user in
Page 12 and 13: 6.0 POCKET PC INTERFACE SCREENSThe
Page 14 and 15: 6.3 TEST: GeneralScreen Instruction
Page 16 and 17: 6.33 TEST: Dither Control Page (Man
Page 18 and 19: 6.4 PROFILE: GeneralSetting up Test
Page 20 and 21: 6.5 UUT (UNIT UNDER TEST) SETUP: Ge
Page 22 and 23: UUT SUPPLEMENTAL PAGE1. Enter the U
Page 24 and 25: 6.51 UUT (UNIT UNDER TEST) SETUP: D
Page 28 and 29: EDIT DEFAULTS PAGEDisplay trend gra
Page 30 and 31: ENGINEERING UNITS SCREENThis page i
Page 32 and 33: Standard 869Unit Under Test(Model 2
Page 34 and 35: 9.0 MICRO-CAL MANAGER INTERFACEThe
Page 36 and 37: Pocket PC Database - This list show
Page 38 and 39: New Button - This button opens a di
Page 40 and 41: Once a UUT ID is selected, the test
Page 42 and 43: 10.0 GLOSSARY OF TERMSAtmospheric P
Page 44 and 45: 12.0 SPECIFICATION DERIVATIONSTotal
Page 47 and 48: Non-LinearityRelationship of a cali
Page 49: 14.0 WARRANTY & LIMITATION OF LIABI

User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS

Create successful ePaper yourself

Delete template?

Save as template?

User Manual Micro-Calâ¢ Model 869 - Dipl.ing. Houm AS