Complete (13 MB) - Chris Alston's Chassisworks
Complete (13 MB) - Chris Alston's Chassisworks
Complete (13 MB) - Chris Alston's Chassisworks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Install the tie rod end in the steering arm.Hold it in place next to the tie rod and adjustthe jam nut until it is against the tie rod end.Remove the tie rod end from the steeringarm and thread it onto the tie rod until itcontacts the jam nut. Next, reinstall the tierod end into the steering arm. Verify thedistance from the frame to the inside of thetie rod end; this should be 8 5/8 inches asmeasured earlier.Repeat this procedure for the passengerside. The measurements are the same asthe driver side.917703 Page 25