Complete (13 MB) - Chris Alston's Chassisworks

You can now final tighten the brake line atthe caliper adapter.Repeat this procedure for the passengerside brake line assembly.Installing BilletEngine Mounts & TransmissionMid PlateFor clarity, some of the engine installationphotos are shown without the clip installed inthe car. If you have the luxury of a liftavailable, it is actually easier to set the bodyonto the frame with the engine and transmissioninstalled. This does present its ownproblems because it is more difficult to alignthe body mounting locations. You will needa lot of extra hands and three floor jacks tomove the frame and engine assembly underthe car. A safety note: The car will be veryrear end heavy and tend to tip on the lift.We show how to install our clip on jackstands because we feel it is a more popularinstallation method.There are two types of motor mountsavailable; motor plates, and side mounts.The Chassisworks motor plates areavailable for small and big block Chevyengines. They are shipped completelymachined and ready to bolt in. Theysandwich between the water pump andblock and bolt to tabs that are pre-welded tothe frame.917703 Page 53