S5600 Installation Instructions - Efco

More documents

Recommendations

Info

Series 5600 Outside Glazed Installation InstructionsSection III: Typical Anchorage MethodsSTEP #6 SPECIAL SEALANT NOTESeal the vertical fillers at the intersection of the heads, sills, and intermediatehorizontals immediately before snapping the filler and the vertical mullionstogether. Tool the sealant smooth with the face of the glazing pocket, andremove excess sealant from the glazing reglets.IntermediatefillerIntermediateverticalApply sealant as shownat the heads, sills, andintermediate horizontals.EFCO CORPORATION 6/2012 PART NO. YS56 Page 12 of 54
Series 5600 Outside Glazed Installation InstructionsSection III: Typical Anchorage MethodsSTEP #7 INSTALL FRAME COMPONENTSSet the last frame in the run into the opening mating the filler with theintermediate vertical, and rotate the frame around to the perimeter anchorchannel until the filler and vertical snap together. Using dead load shims beneatheach vertical mullion to level the frame, make all necessary adjustments toproperly locate the frame to established benchmarks, and apply the temporaryretainers.Apply dead loadshims belowverticals.Apply temporaryretainers.EFCO CORPORATION 6/2012 PART NO. YS56 Page 13 of 54
Page 4: Series 5600 Outside Glazed Installa
Page 7 and 8: Series 5600 Outside Glazed Installa

S5600 Installation Instructions - Efco

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?