S5600 Installation Instructions - Efco

More documents

Recommendations

Info

Series 5600 Outside Glazed Installation InstructionsSection V: Alternate Anchorage Method (PunchedOpenings)STEP #6 Set Group of FramesAfter the frame is plumb, all adjustments have been made, and the frames have beenproperly installed relative to established benchmarks, use temporary retainers at theperimeter of the curtain wall elevation to hold the frame in position. Space thetemporary retainers approximately 18” to 24” around the perimeter. Insertadditional dead load shims as needed beneath each vertical mullion to level andalign the horizontals.Apply temporaryretainers atperimeter.Exterior ViewEFCO CORPORATION 6/2012 PART NO. YS56 Page 26 of 54
Series 5600 Outside Glazed Installation InstructionsSection VI: Perimeter Channel Splice (PunchedOpenings)STEP #1 Splice Perimeter ChannelInstall the perimeter channel to the head and sill conditions with appropriate shimsand anchor bolts. The channel must be set to proper benchmarks for the finalposition of the wall. The nominal gap for the splice joint is 3/8”. Apply bond breakertape to the splice sleeve.Anchor bolts as required.Splice sleeveBond breaker tape3/8” splice jointShim asrequired.EFCO CORPORATION 6/2012 PART NO. YS56 Page 27 of 54
Page 4: Series 5600 Outside Glazed Installa
Page 7 and 8: Series 5600 Outside Glazed Installa

S5600 Installation Instructions - Efco

Create successful ePaper yourself

Delete template?

Save as template?