S5600 Installation Instructions - Efco

More documents

Recommendations

Info

Series 5600 Outside Glazed Installation InstructionsSection X: Vertical Splice JointsSTEP #2 Attach Mullion Splice SleeveA.) Apply bond breaker tape to the mullion splice sleeve.B.) For standard installation, attach the mullion splice sleeve to the top of thelower mullion with splice sleeve attachment screws. Cap seal the fastenerheads.Mullion splice sleeveBond breaker tapeSplice attachment screws(Cap seal)Splice attachment screw(When required)See Step 1, item “B”, page 44.EFCO CORPORATION 6/2012 PART NO. YS56 Page 46 of 54
Series 5600 Outside Glazed Installation InstructionsSection X: Vertical Splice JointsSTEP #3 Install Adapters and Seal Mullion SpliceA.)B.)C.)Seal gasket races continuously and snap-in adapters, if required.Install backer rod to back-up sealant at adapter and mullion joints.Apply sealant and tool into joints.Glazing adapters(When required)Field install backer rod at themullion and adapter joints toback-up the sealant.Field apply sealant asshown and tool into joint.EFCO CORPORATION 6/2012 PART NO. YS56 Page 47 of 54
Page 4: Series 5600 Outside Glazed Installa
Page 7 and 8: Series 5600 Outside Glazed Installa

S5600 Installation Instructions - Efco

Create successful ePaper yourself

Delete template?

Save as template?