Windchill System Administrator's Guide

mapping rules file, you add or edit properties with the xconfmanager utility,
which is discussed elsewhere in this guide.
7. In the rules csv file, comment out or delete all entries and uncomment the
final entry.
8. Load the rules csv file.
Note: This may take a considerable amount of time.
9. Revault the cache vault;
10. Remove all vaults except the cache vault;
11. In wt.properties, add the entry, wt.fv.forceContentToVault=true, and restart
method server. If you are not setting properties through a graphical user
interface or in a mapping rules file, you add or edit properties with the
xconfmanager utility, which is discussed elsewhere in this guide.
Changing the Location of Files in External Vaults
You may wish to change the location of files from one external vault to another.
The following procedure shows how to move files from one vaulted folder, for
example, /opt/windchill/vaulting/folder-001) to a folder in a different vault, for
example, /usr/vaulting/folder-001) without affecting Windchill.
To change the location of vaulted files, perform the following steps:
1. Log into Windchill as an administrator.
2. Click System Administration > External Storage Administrator >
Revaulting Scheduler. In the External Storage Scheduling window, either
verify that no revaulting is currently underway or cancel all revaulting which
is (or is about to be) in progress.
3. Click External Storage Administrator > Vault Configuration.
4. In the Vault Configuration window, click on the Folders node and select the
folder that you want to move.
5. Click Object > Update. In the Update Folder dialog box, check Read-Only,
then click OK.
6. Copy all the files stored inside /opt/windchill/vaulting/folder-001 to
/usr/vaulting/folder-001.
7. Select Object > Mount and update the mount location from
/opt/windchill/vaulting/folder-001 to /usr/vaulting/folder-001.
8. To test the success of the location change, rename
opt/windchill/vaulting/folder-001 and try to access the content of a Windchill
object stored in the external vault.
Administering External File Vaults 3-23