Kingfisher PLUS+

More documents

Recommendations

Info

Document Information Document Control Copyright Intellectual Property Licence Copyright CSE-Semaphore (Australia) Pty Ltd. ABN 35 006 805 910 info@rtunet.com, www.rtunet.com CSE-Semaphore asserts ownership of the intellectual property contained herein and claims copyright and authorship. CSE-Semaphore has and retains all rights of ownership and use of the material herein in its on-going business. This document is provided to the intended recipient(s) under a non-exclusive licence. This licence permits Fair Use of the document for operational requirements, without payment of further royalty or licence fee. Fair Use includes making copies of the document for operational, backup and archive purposes. Fair Use includes distributing copies of the document to other entities for the purposes of their performing related works for the intended recipient(s). Fair Use does not include creating, selling or distributing copies of the document for other purposes. All copies must retain this statement of Intellectual Property and Copyright. Revision History Rev. Date Summary 1.0 4/10/2007 First release. G30 (stand-alone) processor and supported hardware. Serial comms option card will be supported in a future firmware release. Other comms option cards will soon be available. 1.1 20/3/2008 Updated G30 isolation specifications. G30 (firmware 1704+) now supports OPT-SER serial option boards. Added more interface cables. 1.2 4/9/2008 Added Series 3 (G3, G30) to Series 2 (CP-xx, PC-1, LP-x) serial port conversion cable (allows Series 2 standard cables to be directly connected). Added additional safety warnings. Updated Glossary. Updated GSM Modem cable. Added DIN rail mounting bracket. Updated RS422/RS485 wiring diagrams. Added wiring examples for PSO-ACR power supply card. 1.3 11/12/2008 Updated the digital input voltage range specification for the IOD-MXx modules. Added installation warning regarding Restricted Access Locations. Changed name of chapter “Mounting” to “Installation” G30 Hardware Manual 1.3 www.rtunet.com/support Page 2
SAFETY WARNINGS CAUTION Installation This equipment shall be installed only in RESTRICTED ACCESS LOCATIONS by the appropriately trained service personnel. The unit should not be mains powered (AC or DC) unless it is installed correctly. Fire Risk A supply voltage above the specified limits may cause fire. CAUTION Class I Division 2 Classification This equipment is suitable for use in Class I, Division 2, Groups A-D or non-hazardous locations only if used with a PSO-DCU power supply card If a PSO-ACR power supply card is used, this equipment is suitable for use in nonhazardous locations only. WARNING – EXPLOSION HAZARD – SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2. AVERTISSEMENT: RISQUE D’EXPLOSION – LA SUBSTITUTION DE COMPOSANTS PEUT RENDRE CE MATÉRIEL INACCEPTABLE POUR LES EMPLACEMENTS DE CLASSE I, DIVISION 2. CAUTION WARNING – EXPLOSION HAZARD – DO NOT REPLACE UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS. AVERTISSEMENT – RISQUE D’EXPLOSION – COUPER LE COURANT OU S’ASSURER QUE L’EMPLACEMENT EST DÉSIGNÉ NON DANGEREUX AVANT DE REPLACER LE. WARNING – EXPLOSION HAZARD – DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NONHAZARDOUS AVERTISSEMENT – RISQUE D’EXPLOSION – AVANT DE DÉCONNECTER L’EQUIPMENT, COUPER LE COURANT OU S’ASSURER QUE L’EMPLACEMENT EST DÉSIGNÉ NON DANGEREUX. G30 Hardware Manual 1.3 www.rtunet.com/support Page 3
Page 1: Kingfisher PLUS+ G30 Hardware Manua
Page 5 and 6: 1. G30 Standalone RTU FEATURES C-ti
Page 7 and 8: Port 1 Ethernet Pinout RJ45 Pin Eth
Page 9 and 10: Wiring Diagram - RS422 4-Wire The M
Page 11 and 12: PSO-ACR Specifications Input Supply
Page 13 and 14: DC Input Card, Unregulated (PSO-DCU
Page 15 and 16: 4. IO Daughter Cards IO Daughter Ca
Page 17 and 18: MX2 / MX3 Digital Inputs Inputs per
Page 19 and 20: MX2 / MX3 Analog Inputs Inputs per
Page 21 and 22: IO Daughter Card - MX4: 16DI, 16DO
Page 23 and 24: MX4 Digital Inputs Inputs per card
Page 25 and 26: MX4 Wiring Diagram View ing Front O
Page 27 and 28: G30 Serial Port Converter Converts
Page 29 and 30: MaxStream External Spread Spectrum
Page 31 and 32: 7. Glossary AI, AO, DI, DO Analog I
Page 33 and 34: 5. Connect short cable to MX card.
Page 35 and 36: 15. Install front case, taking care

Kingfisher PLUS+

Create successful ePaper yourself

Delete template?

Save as template?