Kingfisher PLUS+

More documents

Recommendations

Info

5. Interface Cables G30 Ethernet Connection Cable To connect directly to a G30 with a PC, an Ethernet crossover cable (as supplied with Toolbox <strong>PLUS+</strong>) is required as illustrated below. If connecting to an Ethernet hub, a straight through cable or a crossover cable can be used. G30 Ethernet Crossover Cable Ethernet Switch Ethernet Network Ethernet Switch G30 Ethernet Straight Through Patch Cables The above cables are industry standard and are readily available. G30 Hardware Manual 1.3 www.rtunet.com/support Page 26
G30 Serial Port Converter Converts a G30 serial port into a CP-xx serial port. Series 2 (CP-xx, PC-1, LP-1) serial port cables can then be used with the converted G30 serial port. G30 Serial Card G30 RJ45 RJ45 Socket - Surface Mount Box (with screw terminals) CP-xx Serial Port RJ45 Socket RJ45 Socket 87654321 DSR 1 DCD 2 DTR 3 GND 4 RXD 5 TXD 6 CTS 7 RTS 8 Patch lead wire n/c n/c Box Wire 7 4.3 VDC 5 DCD 8 DTR 4 GND 2 RXD 1 TXD 3 CTS 6 RTS 12345678 G30 to G30 Serial Crossover Cable G30 Serial Card G30 Heatshrink (Wires joined inside as shown below) RJ45 RJ45 G30 Serial Card G30 RJ45 Socket TXD 6 RXD 5 GND 4 CTS 7 RTS 8 Serial Crossover Cable 6 TXD 5 RXD 4 GND 7 CTS 8 RTS RJ45 Socket 8765432 1 8765432 1 G30 to CP-xx Serial Crossover Cable G30 Serial Card G30 Heatshrink (Wires joined inside as shown below) RJ45 RJ45 CP-xx (also PC-1, LP-1) RTU Serial Port RJ45 Socket TXD 6 RXD 5 GND 4 CTS 7 RTS 8 Serial Crossover Cable 1 TXD 2 RXD 4 GND 3 CTS 6 RTS RJ45 Socket 87654321 12345678 G30 Hardware Manual 1.3 www.rtunet.com/support Page 27
Page 1 and 2: Kingfisher PLUS+ G30 Hardware Manua
Page 3 and 4: SAFETY WARNINGS CAUTION Installatio
Page 5 and 6: 1. G30 Standalone RTU FEATURES C-ti
Page 7 and 8: Port 1 Ethernet Pinout RJ45 Pin Eth
Page 9 and 10: Wiring Diagram - RS422 4-Wire The M
Page 11 and 12: PSO-ACR Specifications Input Supply
Page 13 and 14: DC Input Card, Unregulated (PSO-DCU
Page 15 and 16: 4. IO Daughter Cards IO Daughter Ca
Page 17 and 18: MX2 / MX3 Digital Inputs Inputs per
Page 19 and 20: MX2 / MX3 Analog Inputs Inputs per
Page 21 and 22: IO Daughter Card - MX4: 16DI, 16DO
Page 23 and 24: MX4 Digital Inputs Inputs per card
Page 25: MX4 Wiring Diagram View ing Front O
Page 29 and 30: MaxStream External Spread Spectrum
Page 31 and 32: 7. Glossary AI, AO, DI, DO Analog I
Page 33 and 34: 5. Connect short cable to MX card.
Page 35 and 36: 15. Install front case, taking care

Kingfisher PLUS+

Create successful ePaper yourself

Delete template?

Save as template?