WLCP-36WST-S3

More documents

Recommendations

Info

WLCP-36WST-S3 WTP-4408 Controller Introduction WPS-5527K Remote Sensor Head (optional) Point Sensor to Northern sky for the most consistent readings. Connect Sensor, if used, to only one Photo Controller. N WTP-4408 Photo/Time Controller Easy to program with built-in display and membrane keypad. Eight independent outputs for switching relays directly or groups of relays via scanners. Manual override. Automatic Daylight Savings. 64 Holiday dates. Manual override. Astronomic and sentry switch options. Accurate switching at specific light levels for each output when using remote sensor. Range: 0-6,000 footcandles. Thu 15, Nov 2007 2 : 45 : 33 pm Light Level: 110fc SETUP SCHED MANU INFO 2-Wire LED Switch LED indicator push button switch for Douglas 2-wire relays and switch inputs. Can operate in parallel with a WTP-4408 output. Can provide convenient manual control for each output. LEDs show status of the connected relay or input. Red LED indicates ON and green LED indicates OFF. WPS-5527K WR-8501 WTP-4408 WT2-Wire HID Relays (Panel Mounted) A WTP-4408 output can directly control Douglas panel-mounted 2-wire relays. (WR-6161, WR-6162 or WR-6172) Each output can directly control up to 4 relays. The relays are suitable for all types of lighting loads including capacitor-corrected HID ballasts. 2-wire latching relay technology. Manual override lever & ON/OFF indicator built into each relay. Operable with remote switches. WR-6161 Relay Panel Components WLCP-36WST-S3 1.1 page 8 lighting controls
WLCP-36WST-S3 WTP-4408 Controller Description LCD Display In normal operating mode, shows the present time and (if sensor used) light level reading. In other modes, shows various prompts to guide in viewing and editing programs. WPS-5527K Remote Sensor Point to the Northern sky for the most consistent readings. Connect sensor to only one Controller. N Wiring Wire length max: 500'(150m). Use two #18AWG unshielded wires. Sensor Inputs Thu 15, Nov 2007 2 : 45 : 33 pm Light Level: 110fc SETUP SCHED MANU INFO Escape Button Power Indicator Membrane Keypad Press keys to set time and enter programs and Power Inputs WTP-4408 General Description Electronic 365-Day Astronomic Time/Photo Controller for switching Douglas 2-wire relays and scanners. Fits in Douglas relay Panels on center DIN rail. Uses an LCD display and membrane keypad for programming. Optional WPS-5527K Photo Sensor permits photocell control. Each output can be programmed to have a unique light level switching point. Each output is programmed to switch ON and OFF when an event occurs. Events can be: Time Based: Lights are turned ON and OFF at specific times of day. Astro Based: Light are turned ON and OFF according to the position of the sun in the sky. Photo Based: Lights are turned ON and OFF depending to measured light level (requires WPS-5527K Photo Sensor). Combination: Lights are turned ON by Photo or Astronomic measurement and OFF by time. Conversely, lights can be switched ON by time and OFF by Photo or Astronomic. Menu Buttons Clear Button Outputs 8 outputs designed to switch Douglas 2- wire relays or scanners. Programming the WTP-4408 Use the membrane key pad and the LCD graphic display. Prompts appear on the display to guide you in programming the unit. Any of the relay outputs can be programmed to have (including combinations of each): -ON/OFF timed events -Sentry -Astronomical -Photometric. Up to 900 events can be scheduled in a week. Set any scheduled event for any output to run on any day of the week (Su/Mon/Tue/Wed/Th/Fri/Sat) or on any specific date or Holiday. 64 Holiday dates are available. In the event of power loss, the data in the Controller's memory is retained. Programming and Setup features are retained indefinitely, and time-of-day setting is retained for 72 hours. Specifications Inputs Power: 24VAC/100mA. Class 2 low voltage device. Power rating does not include power for switching relays or scanners. Connect switches in parallel with Controller outputs for remote override switching. Optional WPS-5527K Photo Sensor. Range: 0 to 6,000 footcandles. Remote mount. Outputs Eight timer/photo controlled outputs for Douglas relays and scanners. Maximum number of relays per output: 4. Connect with #18 AWG wire. Maximum length for relay control is 500' (150m). Maximum number of scanners per output: 10. Connect with #18 AWG wire. Maximum length for scanner control is 2000' (600m). Sensor A WPS-5527K Remote Photo Sensor can connect to the Controller to provide accurate light level measurements. The WPS-5527K has a range of 0 to 6,000 footcandles +/- 5%. Each output can have a unique set of light level switching points to satisfy different requirements. A dusk-to-dawn typical setting would be 20fc high level (OFF point) and a 5fc low level (ON point). An interior skylight example could be 1000fc (OFF point) and 700fc (ON point). Environment Indoors, stationary non-vibrating, non-corrosive atmosphere and noncondensing humidity. Ambient operating temperature: +32 0 F to +140 0 F (0 0 C to +60 0 C). Components WLCP-36WST-S3 1.1 page 9 lighting controls
Page 1 and 2: WLCP-36WST-S3 Lighting Control Pane
Page 3 and 4: WLCP-36WST-S3 One Line Diagram Comp
Page 5 and 6: WLCP-36WST-S3 Interface List Compon
Page 7 and 8: WLCP-36WST-S3 Relay Panels List Com
Page 9: WLCP-36WST-S3 WTP-4408 Controller I
Page 13 and 14: • Buttons A, B, C & D select opti
Page 15 and 16: WLCP-36WST-S3 WTP-4408 Controller P
Page 27 and 28: WLCP-36WST-S3 Lighting Control Desi
Page 39 and 40: WLCP-36WST-S3 Scheduling Menu WTP-4
Page 41 and 42: WLCP-36WST-S3 WTP-4408 Controller A
Page 43 and 44: WLCP-36WST-S3 WTP-4408 Controller E
Page 45 and 46: WLCP-36WST-S3 WRS-2224 Relay Scanne
Page 57 and 58: WLCP-36WST-S3 2-wire HID Relays Tec
Page 59 and 60: WLCP-36WST-S3 PWEx Relay Panels Tec
Page 61 and 62:
WLCP-36WST-S3 H Breaker Lights Rela
show all

WLCP-36WST-S3

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?