WLCP-36WST-S3

More documents

Recommendations

Info

WLCP-36WST-S3 WTP-4408 Controller Mounting Mounting/Installation WTP-4408 Controller The WTP-4408 Photo/Timer is mounted inside the relay control panel on 35mm DIN rail. Best to locate the panel in an area that is accessible for programming the WTP-4408. Installation environment: indoors, stationary, non-vibrating, noncorrossive atmosphere and non-condensing humidity. Ambient operating temperature: +32 0 F to +140 0 F (0 0 C to +60 0 C). Optional WPS-5527K Sensor Head Do not mount the sensor where artificial light shines directly on it. For best results, mount the sensor pointing to the Northern sky. The WPS-5527K Sensor is waterproof and able to withstand harsh climate. However, when possible, mount the sensor either indoors pointing outward or in a sheltered area. The sensor's measurements will be less affected by dirt, ice or snow build-up. If mounting outdoors, try to shelter the sensor from the elements. For example, mount the sensor on the underside of the junction box (as shown in INSERT A). The sensor has a plastic mounting nipple that can be threaded to a 1/2" pipe thread. A mounting nut is also supplied for mounting to a 1/2" knockout. Junction Box N Sensor Wall 6.5" (165) 3.25" (83) 12" wire (#18 AWG) 9 6 2 " " & 6 E A 2 D J + J H A H Esc Power A B C D 1 2 3 Mo 4 5 6 Th 7 8 9 Su 0 Wh 1 Output 2 Output 3 Output 4 Directions • Buttons A, B, C & D select options shown at Output 5 the bottom of the display. Follow prompts which appears on the display to set up the unit and/or view/edit programs Output 6 • Use only to control Douglas Relays or Relayt A Scanners. Output 7 • For more information rfer to "Applications B & Directions" booklet or visit Output 8 www.DouglasLighting Control.com White Optional WPS-5527 Photo Sensor lighting controls Blue Tu Fr We Sa WPS-5527K Sensor Head WTP-4408 Controller 24VAC Clr Power for Outputs INSERT A 35mm DIN Rail Mounting 4.0" (102) 1.75" (45) Components WLCP-36WST-S3 1.1 page 10 lighting controls
• Buttons A, B, C & D select options shown at the bottom of the display. Follow prompts which appears on the display to set up the unit and/or view/edit programs • Use only to control Douglas Relays or Relayt Scanners. • For more information rfer to "Applications & Directions" booklet or visit www.DouglasLighting Control.com WLCP-36WST-S3 WTP-4408 Controller Setup Planning & Initial Setup 1) Fill out a working copy of the event & relay schedules. This will help guide the planning process. 2) From the filled-in relay panel schedule determine which relays are connected to the same local low voltage switch and/or have the identical schedule. Connect these relays to the same relay output. CAUTION: Ensure that no more than 4 relays are connected together. A scanner will be required to switch larger quanities of relays simultaneously. Ensure that outputs are not connected together. 3) Use the controller's manual (MANU) override mode to verify that the correct relay groups are being switched by the correct relay output. 4) Access the SETUP menus to ensure if any of the following settings should be modified: Daylight Savings, Astro, Photocell and Sentry options. 5) For Astro location information refer to Appendix A for latitude, longitude & time zone information for a variety of North American Cities. Do not use the Astro feature for latitudes above 55°N. 6) Access the schedule (SCHED) menu to enter the scheduled events using the completed event schedule. See the section titled "SCHEDULING" for details. Based upon the completed panel schedule an Event Schedule can created for each relay. EVENT SCHEDULE Output #1 - Event Sequence Wall Pack A-11 First employee starts at 7:30AM. Turns the Lobby & Corridor lights ON using the local low voltage switch located in the Lobby. All other lights are turned ON by local switches. Last employee leaves at 6:45PM. Turn all interior lights OFF (7:00PM) after last departure. Repeat OFF sweeps ensure that the lights are turned OFF (9PM, 11PM, 1AM, 3AM & 5AM) in case they are turned ON by a local switch. OUTPUT #1 AREA CONTROLLED: Interior Lighting TIME AM/PM COMMENTS ACTION HI fc LOW fc M T W TH F SA SU 7:00 9:00 11:00 1:00 3:00 5:00 PM PM PM AM AM AM End of the work day lights turn OFF Repeat OFF sweep Repeat OFF sweep Repeat OFF sweep Repeat OFF sweep Repeat OFF sweep OFF OFF OFF OFF OFF OFF Output #2 - Event Sequence The Photometric control feature is enabled at 5:00AM. The WTP-4408 will automatically check the measured light level from the sensor head and compare this to the Hi & Low setpoints. • If the measured light level is above Hi setpoint of 20fc, the Security lights will switch OFF. • If the measured light level is in between the Hi (20fc) & Low (5fc) no action will occur. • If the measured light level is below the Low setpoint of 5fc, the Security lights will switch ON. Throughout the course of the day the Security lights will switch ON at dusk and OFF at dawn. OUTPUT #2 AREA CONTROLLED: Security TIME AM/PM COMMENTS ACTION HI fc LOW fc M T W TH F SA SU 5:00 AM Photo operation enabled PHOTO ENB 20 5 Output #3 - Event Sequence The Photometric control feature is enabled at 5:00AM. The WTP-4408 will automatically check the measured light level from the sensor head and compare this to the Hi & Low setpoints. • If the measured light level is above Hi setpoint of 20fc, the Security lights will switch OFF. • If the measured light level is in between the Hi (20fc) & Low (5fc) no action will occur. • If the measured light level is below the Low setpoint of 5fc, the Parking Lot lights will switch ON. Photometric control feature is disabled by an OFF command at 11:00PM. The Parking Lot & Shipping/Receiving lights will also be switched OFF. OUTPUT #3 AREA CONTROLLED: Parking Lot & Shipping/Receiving Bay TIME AM/PM COMMENTS ACTION HI fc LOW fc M T W TH F SA SU 5:00 11:00 AM PM Photo operation enabled Parking Lot lights turned OFF. Photo operation disabled. PHOTO ENB OFF 20 5 A-5c A-3c A-5c A-3c A-1d A-1d Sw a B B E ? A A-7a LIGHTING FLOOR PLAN Wall Pack A-11 / A A H = B B E ? A ) H A = A-3c A-5c A-3c A-5c + H H E @ H A-1d Sw c Sw Sw B B E ? A b d Wall Pack A-11 A-7b RELAY PANEL: A-1d Sw Grp Wall Pack A-11 A-1d A-1d > > O A-1d Wall Pack A-11 Signage A-9 XYZ Company Office Pole Light A-13 Pole Light A-13 2 = H E C J A Panel Schedule can be created based on the Lighting Floor Plan. The schedule will indicate the level of control required for each relay plus circuit & area of control description. LCP-B Circuit Relay Interface Local Master Timer Load Description Number Number O/P Number Switch Switch Control Lobby & Corridor B-1a 1 PRS1.1 Sw-a TP-1 General Office Area B-3b 2 PRS1.2 Sw-b Sw-Int TP-1 General Office Area B-3c 3 PRS1.3 Sw-c Sw-Int TP-1 Office #1 B-5d 4 PRS1.4 Sw-d TP-1 Office #2 B-5e 5 PRS1.5 Sw-e TP-1 Boardroom B-7f 6 PRS1.6 Sw-f TP-1 Office #3 B-9g 7 PRS1.7 Sw-g TP-1 Office #4 B-9h 8 PRS1.8 Sw-h TP-1 Production/Office B-11j 9 PRS1.9 Sw-j TP-1 Production/Assembly B-13k 10 PRS1.10 Sw-k Sw-Int TP-1 Production/Assembly B-13m 11 PRS1.11 Sw-m Sw-Int TP-1 Warehouse B-15n 12 PRS1.12 Sw-n Sw-Int TP-1 Women's Washroom B-17p 13 PRS1.13 Sw-p TP-1 Men's Washroom B-17q 14 PRS1.14 Sw-q TP-1 Security Lighting (Wall Pack) B-19 15 PRS1.15 Sw-Ext Parking Lot Lighting (Pole Light) B-21 16 PRS1.16 5 w-Ext TP-3 Signage B-23 17 PRS1.17 5 w-Ext Pylon Sign B-25 18 PRS1.18 Sw-Ext TP-5 Shipping/Receiving Bay B-27 19 PRS1.19 Sw-Ext TP-3 Spare 20 PRS1.20 Spare 21 PRS1.21 Spare 22 PRS1.22 Spare 23 PRS1.23 Spare 24 PRS1.24 WTP-4408 CONTROLLER Enter the Event Schedules into the WTP-4408 memory. The schedules will operate once all events are saved & entered into memory. PANEL SCHEDULE 9 6 2 " " & 6 E A 2 D J + J H A H Thurs 15, Nov 2007 8:30:03 AM Light Level: 110fc SETUP SCHED MANU INFO Esc Power A B Optional WPS-5527 Photo Sensor A B C D 1 2 3 6 K 4 5 6 6 D . H 7 8 9 5 K 0 Directions Photocell Control 9 A 5 = TP-2 TP-3 TP-3 Clr 2 M A H B H K J F K J I Wh 1 Output 2 Output 3 Output 4 Output 5 Output 6 Output 7 Output 8 White lighting controls Blue 24VAC Astro Control TP-4 TP-5 Components WLCP-36WST-S3 1.1 page 11 lighting controls
Page 1 and 2: WLCP-36WST-S3 Lighting Control Pane
Page 3 and 4: WLCP-36WST-S3 One Line Diagram Comp
Page 5 and 6: WLCP-36WST-S3 Interface List Compon
Page 7 and 8: WLCP-36WST-S3 Relay Panels List Com
Page 9 and 10: WLCP-36WST-S3 WTP-4408 Controller I
Page 11: WLCP-36WST-S3 WTP-4408 Controller D
Page 15 and 16: WLCP-36WST-S3 WTP-4408 Controller P
Page 27 and 28: WLCP-36WST-S3 Lighting Control Desi
Page 39 and 40: WLCP-36WST-S3 Scheduling Menu WTP-4
Page 41 and 42: WLCP-36WST-S3 WTP-4408 Controller A
Page 43 and 44: WLCP-36WST-S3 WTP-4408 Controller E
Page 45 and 46: WLCP-36WST-S3 WRS-2224 Relay Scanne
Page 57 and 58: WLCP-36WST-S3 2-wire HID Relays Tec
Page 59 and 60: WLCP-36WST-S3 PWEx Relay Panels Tec
Page 61 and 62: WLCP-36WST-S3 H Breaker Lights Rela

WLCP-36WST-S3

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?