WLCP-36WST-S3
WLCP-36WST-S3 - Douglas Lighting Control
WLCP-36WST-S3 - Douglas Lighting Control
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>WLCP</strong>-<strong>36WST</strong>-<strong>S3</strong><br />
WTP-4408 Controller<br />
Programming<br />
Output #3 - Event Sequence<br />
The Photometric control feature is enabled at 5:00 AM. The WTP-4408 will automatically check the measured light<br />
level from the sensor head and compare it to the high and low setpoints.<br />
• If the measured light level is above the high setpoint of 20fc, the Parking Lot lights will switch OFF.<br />
• If the measured light level is in between the high (20fc) and low (5fc) setpoints, no action will occur.<br />
• If the measured light level is below the low setpoint of 5fc, the Parking Lot lights will switch ON.<br />
Photometric control feature is disabled by an OFF command at 11:00PM. The Parking Lot & Shipping/Receiving lights<br />
will be switched OFF.<br />
OUTPUT: #3 AREA CONTROLLED: Parking Lot & Shipping/Recieving Bay<br />
TIME AM/PM COMMENTS ACTION HI fc LOW fc M T W TH F SA SU<br />
5:00<br />
AM<br />
Photo operation enabled.<br />
Parking Lot lights turned OFF.<br />
Photo operation disabled.<br />
PHOTO ENB<br />
20 5<br />
nce<br />
11:00<br />
PM<br />
OFF<br />
Output #4 - Event Sequence<br />
The Astronomic control feature is enabled at 5:00 AM. The WTP-4408 will automatically check to see if the last event<br />
was sunrise or sunset. The Signage will be switched OFF or ON, depending on the last event. On most dates throughout<br />
the course of the year the last event would be sunset, so the Signage will turn ON.<br />
Sunrise occurs. The Signage lights will be switched OFF.<br />
Sunset occurs later on that same day and the Signage lights are switched ON.<br />
OUTPUT: #4 AREA CONTROLLED: Signage<br />
TIME AM/PM COMMENTS ACTION HI fc LOW fc M T W TH F SA SU<br />
5:00 AM Astro operation enabled ASTRO ENB<br />
Output #5 - Event Sequence<br />
The Astronomic control feature is enabled at 5:00 AM. The WTP-4408 will automatically check to see if the last event<br />
was sunrise or sunset. The Pylon Signs will be switched OFF or ON, depending on the last event. on most dates<br />
throughout the course of the year the last event would be sunset, so the Pylon Signs will turn ON.<br />
Sunrise occurs. The Pylon Sign lights are switched OFF.<br />
■ Sunset occurs later on that same day and the Pylon Sign lights are switched ON.<br />
Astronomic control feature is disabled by an OFF command at 11:00 PM. The Pylon Sign lights will also be switched OFF.<br />
OUTPUT: #5 AREA CONTROLLED: Pylon Signs<br />
TIME AM/PM COMMENTS ACTION HI fc LOW fc M T W TH F SA SU<br />
5:00<br />
AM<br />
Astro operation enabled.<br />
Pylon Signage turned OFF.<br />
Astro operation disabled.<br />
ASTRO ENB<br />
11:00<br />
PM<br />
OFF<br />
Components <strong>WLCP</strong>-<strong>36WST</strong>-<strong>S3</strong> 1.1<br />
page 28<br />
lighting controls