WLCP-36WST-S3

WLCP-36WST-S3
WTP-4408 Controller
Programming
3 Sunrise/Sunset Times
If the Astronomical feature is enabled, this Sub-Menu will display the
current sunrise and sunset times that are automatically calculated for the
current date from the latitude, longitude and time zone information.
If there are any scheduled events using Astro function, the times when
lights will be turned ON (sunset) & OFF (sunrise) can easily be determined
from this Sub-Menu.
CAUTION: If offset times have been entered, actual switching will occur at
the time displayed in the Info Screen plus or minus the offset time.
Current Sunrise & Sunset Times
Press the D button to
return back to the
Information Menu.
INFO SCREEN
(a) Memory Status
(b) Sunset/Sunrise Tm
2 OF 4
OK
A B D
TODAYS TIMES:
SUNRISE: 06:27 AM
(b) SUNSET: Relay Status 05:40 PM
OK
D
While in the View Event Log
Sub-Menu, you can clear all
logs from memory by
pressing the CLR
button on the keypad.
This method is quicker than
clearing the logs through
the Setup Menu.
The display will
advise you when
clearing logs, then
will return to the
Information Menu
upon completion.
CLEAR LOGS MENU
Clearing Logs
YES Please Wait ...
CAUTION: Be careful to understand this function prior
to using it. Once the memory has been erased, there is
no recovery mechanism to restore the cleared data.
5 About
Clr
NO
The About Sub-Menu displays the Hardware and Software version
numbers of the WTP-4408 unit.
4 View Event Logs
The logging feature will track the time and the type of scheduled event that
caused the action.
The WTP-4408 controller stores up to 100 log events. Oldest log entries are
discarded for new ones.
The event logging feature is ideal for troubleshooting purposes. It helps monitor
the actions of all relay outputs over a specific period of time. This will help to
isolate when a problem occurred and what action, if any, took place.
Type of Event:
Scheduled Event, Astro
Event, Photo Event or
Manual Override
Total Number of Logs
Log Number
Event Time
Type of Action: ON or OFF
Use the A & B buttons to
scroll through the various
logged actions.
Press the D button to return
to the Information Menu.
INFO SCREEN
(b) Sunset/Sunrise Tm
(c) View Event Log
3 OF 4
OK
A B D
LOG: 01/53 Nov 16/07
01:30 am
RELAY: 01
OFF BY: SCHEDULED EVENT
OK
A
Event Date
Relay Output
Number
Components WLCP-36WST-S3 1.1
page 38
B
D
Software Version
Number
Press the D button to
return to the
Information Menu.
INFO SCREEN
4 OF 4
(c) View Event Log
(d) About
OK
A B D
Hardware Version Number
INFO SCREEN
SW VER: 1.00 / HW VER: 1.00
OK
D
lighting controls