SATRONIC - Control boxes for oil burners

Measurement test base UP 714 M
Measurement test base TT
Measurement test base TM
UP 7.. UP 75..
2
MEASUREMENT TEST BASE UP 714 M
for TF-serie Art. Nr. 18304
This comprises a test base and plug-in unit with a millimeter
to allow measurement of the photocell current. Indicator
lamps are supplied in the test base, to show motor, ignition,
oil valve 1, oil valve 2, circuits an lockout. A push-to-break
switch is also provided for the control circuit.
MEASURMENT TEST BASE UP 770
for TTI 790, MMI and MMG 810 Art. Nr. 18353
Similar to UP 714 M. At the place of the amp-meter the
plugable part contains a switch and two terminals to connect
an external amp-meter (e.g. Satronic Ionimeter). Additionally
a push-button-swith is mounted to switch-on the ignition.
An affected ionisation current can be so easily indicated.
The required measuring instrument (e. g. Satronic Ionimeter)
has to be connected to the two terminals.
MEASUREMENT TEST BASE TT
for TT and MM-serie Art. Nr. 18746
The test base is supplied with connection terminals having
4 mm jack points.
To measure the flamme signal current, the 2 separate jack
connections must be used. A short-circuiting switch is also
incorporated to bridge-out the measuring instrument.
The base is equipped with indicator lamps for fan motor,
ignition trafo, valve 1 and 2 and safety-lockout. Is the burner
which has to be testet-equipped with a TTO-control box, the
measuring instrument has to be replaced by the supplied
test-cable.
MEASURMENT TEST BASE TM
for TM-serie Art. Nr. 18740
Connecting terminals with 4 mm jack points are provided in
the base.
The measuring instrument can be bridged-out by the shortcircuiting
switch incorporated in the test base. Is the burner
which has to be testet-equipped with a TMO-control box,
the measuring instrument has to be replaced by the supplied
test-cable.
We reserve the right to make technical modifications
A Honeywell Company Satronic AG
Brüelstrasse 7
Postfach 324
CH-8157 Dielsdorf