BB ELECTRONICS CATALOG (2010)

Robust ADAM 4100 series
for harsh environmental applications!
Portable USB Analog and Digital I/O
Connect to sensors with any USB enabled PC
Features
• Supports USB 2.0
• Portable USB connections
• No need for external power
Applications
• Temperature measurement • Industrial ON/OFF control
• Industrial and Lab automation
USB-4718
• 2500 VDC isolation on DI
• Thermocouple inputs
MODBUS
Digital input/output modules over RS-485
USB-4716 & USB-4711A
WIDE TEMP
The ADAM-4100 robust series is specifically designed for reliable
operation in more severe environments. Rich, anti-noise functions
empower these modules to confront harsh environments in
industrial automation applications. Can be safely connected or
disconnected without disturbing a running network.
Model No. Digital Input Digital Output Counter Notes Modbus Support Price
ADAM-4150 7 8 — D1 channels can be used as counters, Yes Robust! $155.00
Digital filter function
ADAM-4168 — 8 — Relay 8 form A Yes Robust! 165.00
Analog input modules over RS-485
Model No. Analog Inputs Sensor Input Range Digital Input/Output Notes Modbus Support Price
ADAM-4118 8 Thermocouple +/-15mV to +/-2.5V — Filter auto tuning Yes Robust! $285.00
ADAM-4117 8 — +/-500mV to +/-15V — Filter auto tuning Yes Robust! 270.00
• Supports 4 – 20 mA inputs
• Sampling rate up to 200kS/s • One 32-bit counter
• USB-4711A up to 150kS/s
The USB-4700 series are true plug and play data acquisition
modules. No need to open up your computer chassis to install
boards. Just plug the module into your USB port configure and
start collecting data. No external power supply required, so
L A B V I E W D R I V E R S A VA I L A B L E
• USB 2.0 cable included
• Terminal blocks for I/O connections
• DAQ software for ADAM I/O modules - see page 107
USB-4761
• LEDs for relay out • 2500 VDC isolation on DI
• 5-30 VDC digital input range
USB-4750
• 2500 VDC isolation on input and output
• High sink current on output channels
USB-4751 & USB-4751L
• 24 or 48 TTL digital I/O lines
• Timer/Counter interrupt capability
you can easily carry it out to the shop floor with your laptop
and pull all the data you need. These USB data acquisition
modules are reliable and rugged enough for any industrial
application.
Model No. Digital Input Digital Output Analog Input Analog Output Counter Price
USB-4761 8 isolated 8 relay (form C) – – – $275.00
USB-4711A 8 8 16 (12 bit) single-ended 2 (12 bit) 1 (32 bit) 550.00
USB-4716 8 8 16 (16 bit) single-ended 2 (16 bit) 1 (32 bit) 630.00
USB-4718 8 isolated 8 isolated 8 (16 bit) thermocouple – – 325.00
USB-4750 16 isolated 16 isolated – – 1 (32 bit) 245.00
USB-4751 48 TTL 48 TTL – – 2 (16 bit) or 1 (32 bit) and 1 (16 bit) even 155.00
USB-4751L 24 TTL 24 TTL – – 2 (16 bit) or 1 (32 bit) and 1 (16 bit) even 135.00
You May Also Need…
ADAM-3950 50-Pin Flat Cable Terminal, DIN Rail Mount New! 55.00
PCL-10150 IDC-50 Flat Cable, 1.2M New! 14.00
www.bb-elec.com
Industrial
Hardened!
For Adverse
Conditions
• Broad Power and Temperature Range: Operating Temperature range from –40˚C to +85˚C, unregulated power and
reversal protection, connect and disconnect without disturbing network
• Advanced Noise Interference Protection: More protection 1KV Surge Input, 3KV EFT and 8KV ESD
• Dual Protocol Support: ADAM ASCII and Modbus Support on all 4100 series models for backward compatibility
• The features for individual I/O modules
Dual watchdog timer reboots system if module hangs
LED Display for channel status and system diagnosis
ADAM-4117, Support 200VDC Hi Common Mode Voltage, Uni-polar and Bi-polar input, +/- 15V Input Range
ADAM-4117/4118, Support Filter Auto-tuning or Filter-out 50Hz/60Hz
ADAM-4150, Digital Filter Function, DI channels allow to be used as 3 KHz counter
ADAM-4150 / 4168, DO channels support pulse output function
• DAQ Software for ADAM I/O modules – see page 107
815.433.5100
Remote I/O
Serial Ethernet USB Software
Signal
Conditioners
105