BB ELECTRONICS CATALOG (2010)

Zlinx Xtreme Serial Radio Modems
Peer-to-Peer (P2P) & Peer-to-Multi Peer (P2MP) Connectivity
for Serial Ports and I/Os
Zlinx Xtreme radio modems are ideal for outdoor applications requiring
Serial-to-Serial (RS-232/422/485) connectivity. You can also connect Zlinx
Xtreme Wireless I/Os to a Modbus RTU Master over a wireless network
for point-to-point/peer-to-peer (P2P) or point-to-multi-point/peer-tomulti-peer
(P2MP) connectivity. Zlinx Xtreme gives you the flexibility to
build a wireless network that functions under the worst conditions while
saving you a bundle of money over typical wired applications.
Easy to Configure Wireless Solutions include:
• Serial-to-Serial - connect two or more industrial serial devices together
• Remote I/O to SCADA - connect remote I/O devices such as
temperature, pressure, level, or flow sensors to SCADA or PLC device.
PC with
SCADA Software
Serial-to-Serial
Wireless Communications
Zlinx Radio
Modem
(indoor type)
Zlinx Xtreme
Radio Modem
Zlinx Xtreme
Radio Modem
RF Range, Supplied Antenna
RF Range, High Gain Antenna
Model No RF Data Rate indoor outdoor Outdoor Price
2.4 GHz Radio Modem
ZXT24-RM 250 Kbps 300 ft 1 mi 10 mi $399.00
900 MHz Radio Modem
ZXT9-RM 115 Kbps 3,000 ft 14 mi 40 mi 549.00
Note 1. The specified ranges are design criteria under ideal conditions. Actual range may vary depending on the environmental conditions.
Note 2. To be compliant with 802.15.4 standard, EIRP is limited to 100 mW.
Note 3. USB cable required - #USBAMBM-6F recommended.
Zlinx Xtreme Wireless Analog and Digital I/Os
Peer-to-Peer I/O
(cable replacement)
Wire Replacement for Remote Control and Monitoring
Zlinx Xtreme I/O modules are ideal for applications in harsh
environments that require monitoring and control of remote analog and
digital devices. Indoors or outdoors, the IP67 rated units are easy to
mount without the need for additional cabinets or enclosures.
You Also Have the Option of Two Flexible Configurations:
• Point-to-Point/Peer-to-Peer Mode (P2P) - Two identical I/O modules
can be used to replace expensive wiring or cabling applications. One
point will have analog and digital inputs which are then mapped to
corresponding outputs at other point.
PLC - I/O
Zlinx Xtreme I/O
Zlinx Xtreme I/O
• Modbus I/O Mode - A Modbus RTU master (PLC/SCADA/HMI) is
easily configured to control and monitor remote Zlinx Xtreme I/O
modules via a serial radio modem.
Analog Digital RF Range, Supplied Antenna RF Range, High Gain Antenna
Model No Inputs Outputs Inputs Outputs indoor outdoor Outdoor Price
2.4 GHz I/O
ZXT24-IO-222R2 2 2 2 2 300 ft 1 mi 10 mi $549.00
900 MHz I/O
ZXT9- IO-222R2 2 2 2 2 3,000 ft 14 mi 40 mi 699.00
Note 1. The specified ranges are design criteria under ideal conditions. Actual range may vary depending on the environmental conditions.
Note 2. To be compliant with 802.15.4 standard, EIRP is limited to 100 mW.
Note 3. USB cable required - #USBAMBM-6F recommended.
Learn More About What Wireless I/O Can Do For You
Don’t be intimidated by wireless technology. It’s easier than you think once you feel comfortable with the basic concepts.
Download this wireless I/O technical article today and become a wireless guru! www.bb-elec.com/WirelessSolutions
www.bb-elec.com
146
815.433.5100