BB ELECTRONICS CATALOG (2010)

Wireless
Serial Radio
Modems
Modular I/O
Antennas
WiFi/802.11
Ethernet
Bridges
Cellular
Routers
Zlinx ® Product Family of Wireless I/O & Radio Modems
Wireless Success is Easier Than Ever!
MODBUS
Common Specifications
• IP30 Ingress Protection Rating
• Long (900 MHz) and (2.4 GHz) Short Range Radio Options
• Versatile Power: 10 to 40 VDC and/or 24VAC
• Wide Temperature Range: -40 to 85°C (selectable)
•AES Encryption: (256 bit) 900 MHz; (128 bit) 2.4 GHz
• Over-the-Air data rates: LR- 9.6k/115.2k(selectable);
SR-250K(fixed)
WIDE TEMP
WIRELESS
IP30, DIN Mount, Industrial Wireless I/O
Wireless I/O - Cable Replacement & Modbus
Connectivity Solutions
Zlinx I/O Specific Features
• Peer-to-peer mirrored I/O mapping
• High performance, low latency response rates - down to 15mS
• Supports field calibration for precision applications
• User defined fail-safe output states ensures safe operation
SECURE
• Modbus Compatible
• Frequency: ISM Band 902 to 928 MHz. 2.4 to 2.4385 GHz
• Modulation: FSK (Frequency Shift Keying)
• Transmit Power: 900 MHz: 1 mW to 1W; 2.4 GHz: 10mW
to 63 mW
• Receiver Sensitivity: 900 MHz: 100 dbm@115.2K,
-110 dbm@9.6K; 2.4 GHz: -102 dBm
Zlinx Wireless I/O modules monitor and control analog, digital and RTD temperature devices remotely. The wireless I/O modules
are available in base I/O and modular expansion I/O configurations. Base I/O modules have built-in radio with limited I/O
combination. Expansion modules have different I/Os types and combinations for cost-effective system integration. Up to 6 expansion
modules can be added to a base I/O module.
Base I/O Modules
Model No. Digital Digital Analog Analog RF Range with RF Range with RF Range Price
Inputs Outputs Inputs Outputs Supplied Antenna Supplied Antenna with High Gain
(indoor max.) (outdoor max.) Antenna (outdoor max.)
2.4 GHz – Short Range Models
ZZ24D-NA-SR 2 2 (PNP) 2 2 300 ft 1 mi 10 mi $419.00
ZZ24D-NB-SR 4 4 (PNP) 300 ft 1 mi 10 mi 349.00
ZZ24D-NC-SR 2 2 (NPN) 2 2 300 ft 1 mi 10 mi 419.00
ZZ24D-ND-SR 4 4 (NPN) 300 ft 1 mi 10 mi 349.00
900 MHz – Long Range Models
ZZ9D-NA-SR 2 2 (PNP) 2 2 3,000 ft 14 mi 40 mi $649.00
ZZ9D-NB-SR 4 4 (PNP) 3,000 ft 14 mi 40 mi 599.00
ZZ9D-NC-SR 2 2 (NPN) 2 2 3,000 ft 14 mi 40 mi 649.00
ZZ9D-ND-SR 4 4 (NPN) 3,000 ft 14 mi 40 mi 599.00
Note 1. The specified RF ranges are design criteria under ideal conditions. Actual range may vary depending on the environmental conditions.
Note 2. Sinking Analog Output – Requires external power supply
Note 3. ZZPROG1-USB Programming kit required. See page 83.
Digital Inputs (DI) 0-48 VDC NPN (sinking)
The Zlinx I/O system (base + expansion modules) can be configured
in 2 ways:
1 Peer-to-Peer (P2P) I/O cable replacement: Two identical wireless
I/O systems of same frequency and I/O count can be configured as a
wire replacement, Peer-to-Peer system. Analog and digital input
count in one system must equal to the analog and digital output
count in the other. One system must be configured as a P2P Master
and the other as a P2P slave. It does not matter which system is
configured as master. The inputs at one end are wirelessly mapped to
the corresponding outputs at the other end.
Typical applications: Wireless control of remote analog and digital
devices from a PLC/SCADA I/O. Refer to the “Remote Pump Station
Control” example application diagram on page 81.
2 Modbus I/O: Analog, digital and temperature I/Os from up to 247
I/O systems can be wirelessly connected to a Modbus RTU master
such as a PLC or SCADA or an HMI through a Serial Radio Modem.
Point-to-Multi-point configurations are possible.
Typical applications: Remote wireless control of remote analog and
digital devices from a PLC/SCADA I/O. Refer to the ‘Remote
Material Handling Systems’ example application diagram on pages 81.
Expansion I/O Modules
BUILT
O.E.M.
F O R
Y O U
See Page 145
Digital Outputs (DO) 10-48 VDC NPN, PNP, Relays
Analog Inputs (AI) 4-20 mA, 0-20 mA or 0-10 VDC Selectable in software
Analog Outputs (AO) 4-20 mA, 0-20 mA or 0-10 VDC Selectable in software
RTD Temp. Inputs (AI) PT100, PT1000, CU10 Selectable in software
Model No. Digital Digital Analog Analog Price
Inputs Outputs Inputs Outputs
ZZ-8DI-DC 8 $195.00
ZZ-8DO-T 8 (PNP) 195.00
ZZ-8DO-T1 8 (NPN) 195.00
ZZ-4DI4DO-DCT 4 4 (PNP) 195.00
ZZ-4DI4DO-DCT-1 4 4 (NPN) 195.00
ZZ-4AI 4 299.00
ZZ-4AO 4* 299.00
ZZ-4AO-2 4** 299.00
ZZ-2AI2AO 2 2 299.00
ZZ-8DO-R 8 (Relay) 229.00
ZZ-4RTD1 4 345.00
* Sinking Analog Output – Requires external power supply
** Sourcing Analog Output – No external power supply necessary
82
www.bb-elec.com
815.433.5100