BB ELECTRONICS CATALOG (2010)
Catalog from B&B Electronis (2010)
Catalog from B&B Electronis (2010)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Non-Isolated RS-485 Converters<br />
Extend communications up to 4000 feet<br />
Serial<br />
232 422/485<br />
These converters are perfect for applications that<br />
don’t require isolation or port-powered capability.<br />
All models include Automatic Send Data Control,<br />
eliminating the need for software modification.<br />
AUTOMATIC<br />
SEND DATA<br />
CONTROL<br />
See Page 18<br />
Model 485COSR is an economical converter that supports both<br />
2-wire and 4-wire RS-485 communications. There is also<br />
provision for constant enable of the receiver during transmit<br />
for full duplex operation.<br />
Addressable RS-232 to RS-422/485 converter<br />
Network enable “dumb” RS-232 devices<br />
485COSR<br />
485TBLED<br />
485PTBR<br />
485CSP2<br />
Model 485TBLED is one of our most popular models with data<br />
traffic LEDs, RS-422/485 support, and either Automatic Send<br />
Data Control or software driver control. Model 485PTBR has a<br />
convenient terminal block that quickly unplugs from the<br />
converter for ease of wiring. Model 485CSP2 features both<br />
surge controlled and fused data lines on the RS-422/485 side<br />
plus all the features of model 485TBLED.<br />
Model No. RS-232 Connector RS-485 Connector Power Supply Special Features Price<br />
485COSR DB25 female DB25 male 485PS For 2- or 4-wire RS-485. Full duplex operation possible. $64.00<br />
485TBLED DB25 female Terminal block 485PS2 Data flow LEDs. SDC or software driver control. 74.00<br />
Suits RS-422 systems, too.<br />
485PTBR DB9 female Pluggable terminal block 485PS2 Quick disconnect. Can also be set to 4-wire full duplex RS-485 79.00<br />
485CSP2 DB25 female Fused terminal block 485PS2 Built-in surge protection and replaceable fuses on RS-485 side. 84.00<br />
LEDs show traffic. For 2- or 4-wire RS-485 or RS-422.<br />
You May Also Need…<br />
4F125 125mA fuses for Model 485CSP2 (kit of four) 5.00<br />
485PS 120 VAC to 12 VDC @ 100 mA power supply 15.00<br />
485PS2 120 VAC to 12 VDC @ 100 mA power supply 15.00<br />
Converters<br />
Fiber<br />
Optics<br />
Telephone<br />
Modems<br />
232 422/485<br />
Model 485DSS allows RS-232 devices to be placed on an RS-<br />
422 or RS-485 network and be individually controlled. Put a<br />
converter on each device you wish to contact. A host PC with<br />
RS-422 or RS-485 capability can then connect to each node<br />
using a unique address from 0 to 255. Once a node is selected<br />
and the connection made, any type of monitoring, control or<br />
programming information can be exchanged.<br />
A QuickBASIC demonstration program with source code is<br />
included. RS-232 connector is DB25M, RS-485 connector is a<br />
terminal block. Requires an external 12 VDC power supply.<br />
RS-232 to RS-422 converters<br />
Choose from 2, 4, or 8 channels<br />
• Attach a unit to each “dumb” RS-232 device to make it a<br />
network node<br />
• Network up to 32 RS-232 devices up to 4,000 feet away<br />
• Host PC can be 4-wire RS-422, 2 or 4-wire RS-485 (standard<br />
types)<br />
Model No. Description Price<br />
485DSS Addressable RS-232 to RS-422/485 converter $139.00<br />
You May Also Need…<br />
485PS2 120 VAC to 12 VDC @ 100 mA power supply 15.00<br />
Specialty<br />
Converters<br />
Splitters,<br />
Combiners,<br />
Data Taps SEL<br />
232 422<br />
These converters allow your computer to communicate up to<br />
4,000 feet by converting the RS-232 signal to RS-422. If the<br />
peripheral to be connected has an RS-422 interface, only one<br />
converter is required. If both the data transmitting equipment<br />
and data receiving equipment use only RS-232, then two<br />
converters will be required, one at each end of the data line.<br />
These models all have DB25 female connectors on the RS-232<br />
side and DB25 male connectors on the RS-422 side. Models<br />
422LCOR and 422CFCR require the 422PS external 12 VDC<br />
power supply. Model 422CEC requires the 422PS3 external 12<br />
VDC power supply.<br />
• Model 422LCOR converts two signals and has LEDs to<br />
indicate data traffic.<br />
• Model 422CFCR converts four channels.<br />
• Model 422CEC converts eight channels.<br />
422CFCR 422CEC 422LCOR<br />
Model No. Description Price<br />
422LCOR 2 Channels, with LED traffic indicators $59.00<br />
422CFCR 4 Channels, supports TD, RD, RTS, CTS 79.00<br />
422CEC 8 Channels, supports TD, RD, RTS, CTS, DTR, 109.00<br />
DSR, DCD, spare<br />
You May Also Need…<br />
422PS 120 VAC to 12 VDC @ 100 mA power supply 15.00<br />
with power jack plug<br />
422PS3 120 VAC to 12 VDC @ 500 mA power supply 15.00<br />
with power jack plug<br />
Data<br />
Switches Cards<br />
www.bb-elec.com<br />
815.433.5100<br />
23