BB ELECTRONICS CATALOG (2010)

Industrial Gigabit and Ethernet Switches
Featuring 1000Mbps speeds, Power
over Ethernet and wide temperature
WIDE TEMP
EIR405T
Features
Benefits
Gigabit Speeds (400 and 600 series) . . . . . . . . . . . .Higher throughput for high bandwidth networks
PoE (EIRP series) . . . . . . . . . . . . . . . . . . . . . . . . . . . .Power over Ethernet simplifies remote powering
Rugged IP30 DIN/Panel Mount Metal Case . . . . .Built tough for harsh industrial environments
Dual Power Inputs with Alarm Output . . . . . . . . .Redundancy ensures the network keeps running
Wide Temperature Rating on –T models . . . . . . . .Suited for extreme temperature environments
EIR608-2SFP
Gigabit
B&B Electronics’ line of unmanaged (EIR400 series) and managed (EIR600 series) Ethernet switches address applications
requiring Gigabit (1000Base) Ethernet. All of these switches are DIN or panel mountable and accommodate two power inputs
along with an Alarm Relay Output. The –T models are wide temperature rated at -40 to 75ºC. For added flexibility and future
expansion options, many models support a dual function port, where the copper Ethernet and SFP ports are shared. The wide
range power input on these models makes each switch suitable for a variety of applications.
PoE (IEEE 802.3af)-EIRP models only
PoE stands for Power-over-Ethernet, which is just what it says. Power is transmitted over the Ethernet cable along with the data
lines. Each PoE switch has a set of ports that is classified as power source equipment (PSE). These ports can be used to power
IEEE 802.3af compliant powered devices (PD), eliminating the need for a separate power line to be run to each end device. A
whole new set of applications become feasible with PoE switches due to reduced installation costs through ease of setup and
the ability to remotely power end devices. Some common Ethernet devices that a PoE may be able to power are: Access Points,
IP Cameras, Serial Servers, and Ethernet I/O. The PoE ports on these switches follow Alternative A standards and are limited to
15.4 Watts of power output per port. These switches require a 48VDC power supply.
Total PoE Power Temp Price
Model No. Ports 10/100 10/100/1000 10/100 SFP Managed Unmanaged Gigabit PoE Input (VDC) (°C)
EIR405-T 5 5 x x 12 to 48 -40 to 75 $299.00
EIR405-SFP-T 5 4 1 x x 12 to 48 -40 to 75 299.00
EIR410-2SFP-T 10 8 (2) (2) x x 12 to 48 -40 to 75 399.00
EIR418-2SFP-T 18 16 (2) (2) x x 12 to 48 -40 to 75 599.00
EIR608-2SFP 8 6 + (2) (2) x x 12 to 48 -10 to 60 999.00
EIR608-4SFP 8 4 4 x x 12 to 48 -10 to 60 999.00
EIR610-3SFP-T 10 7 (3) (3) x x 12 to 48 -40 to 75 1,099.00
EIR618-2SFP-T 18 16 (2) (2) x x 12 to 48 -40 to 75 1,349.00
EIRP305-T 5 1 4 x x 48 -40 to 75 299.00
EIRP610-2SFP-T 10 (2) 8 (2) x x x 48 -40 to 75 1,399.00
You May Also Need…
SFP-100FX-M-2KM-T SFP Module, 100Base-FX, Multi-mode 2km, LC Connector (-40 to 85 °C) 109.00
SFP-100FX-S-30KM-T SFP Module, 100Base-FX, Single-mode 30km, LC Connector (-40 to 85 °C) 149.00
SFP-1000SX-M-550M-T SFP Module, 1000Base-SX, Multi-mode 550m, LC Connector (-40 to 85 °C) 149.00
SFP-1000LX-S-10KM-T SFP Module, 1000Base-LX, Single-mode 10km, LC Connector (-40 to 85 °C) 199.00
SFP-1000LX-S-20KM-T SFP Module, 1000Base-LX, Single-mode 20km, LC Connector (-40 to 85 °C) 239.00
MDR-60-24 24 VDC, 2.5A DIN rail mount power supply, Slimline 69.00
MDR-100-48 48 VDC, 2A DIN rail mount power supply, Slimline - Great for PoE Switches 79.00
EIRSP1 Industrial Ethernet Surge Suppressor 89.00
DR19RMKT Adjustable 19-inch Rack Mount Kit for EIRx DIN rail products New! 129.00
Ports designated with ( ) indicate the copper and SFP ports are shared. Once the SFP port is utilized, the copper port is disabled.
Ethernet Switches
& Media Converters
Unmanaged
Switches
Managed
Switches Extenders
Media
Converters
N-Tron
Switches
www.bb-elec.com
19-inch DIN Rail Rack Mount Kit
- with adjustable depth. - p125 Cat 6 cabling
page 138
Adjustable
815.433.5100
55