Download the Minto Home Care Guide - Condo
Download the Minto Home Care Guide - Condo
Download the Minto Home Care Guide - Condo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Furnace<br />
Remember to change<br />
your furnace fi lter regularly<br />
(twice a year) to maximize<br />
effi ciency, help keep <strong>the</strong><br />
air in your home clean and<br />
reduce greenhouse gas<br />
emissions.<br />
54<br />
General Maintenance<br />
Prior to occupancy, <strong>Minto</strong> will have cleaned all heating ducts to remove excess<br />
dust and dirt as well as construction debris. There is no recommended time<br />
frame for repeating this practice; <strong>the</strong> need may be based on health problems<br />
such as allergies.<br />
Heat registers and cold air returns must be kept free from obstructions such<br />
as carpets, furniture, and wall hangings. Obstructions could impair <strong>the</strong> air fl ow<br />
and effi ciency of your home’s heating/cooling system.<br />
Furnace fi lters vary in type; ei<strong>the</strong>r a permanent or disposable fi lter will be<br />
provided with your furnace. Filters should be cleaned or changed, depending<br />
on <strong>the</strong> type, at least every two months during <strong>the</strong> heating season. Failure to<br />
clean or replace fi lters may interfere with <strong>the</strong> quality and quantity of air fl ow<br />
within <strong>the</strong> home.<br />
For your safety, please do not store any combustible materials within two feet<br />
of your furnace.<br />
Furnace Operation<br />
If your furnace fails to operate, to avoid <strong>the</strong> inconvenience and perhaps <strong>the</strong><br />
cost of a service call, check <strong>the</strong> following items fi rst:<br />
1. Ensure that <strong>the</strong> home’s <strong>the</strong>rmostat is properly operating and, if applicable,<br />
programmed properly<br />
2. Ensure that exterior intake and exhaust vents are free<br />
of obstruction<br />
3. Ensure that <strong>the</strong> furnace emergency on/off isolating switch located<br />
in <strong>the</strong> furnace area is in <strong>the</strong> ‘on’ position<br />
4. Ensure that <strong>the</strong> circuit breaker in <strong>the</strong> electrical panel dedicated for<br />
<strong>the</strong> furnace is in <strong>the</strong> ‘on’ position<br />
5. Review <strong>the</strong> operating procedures in your furnace manual<br />
During <strong>the</strong> warranty period, if <strong>the</strong> problem continues to exist after checking<br />
all of <strong>the</strong> above, <strong>Minto</strong> Master<strong>Care</strong> should be contacted.<br />
In <strong>the</strong>se instances, <strong>Minto</strong> will contact <strong>the</strong> fi rm that supplied and installed your<br />
furnace and request service. Following <strong>the</strong> lapsing of <strong>the</strong> warranty period,<br />
service calls should be directed to a fi rm of your choice.<br />
Note: Furnace fi lters should be changed every two months.