T-Series Climate Changer ® Air Handlers Sizes 3 through ... - Trane

More documents

Recommendations

Info

T-Series Humidification Module Option ASHRAE Standard 62-1989 suggests maintaining a relative humidity of no less than 30 percent to provide a comfortable, healthy indoor environment. With the T-Series Climate Changer ® air handler, a factory mounted steam humidifier is available as a custom option. Factory mounting within the air handler lowers the humidifier’s installed cost and keeps moisture out of the supply duct. Applications Application Considerations: Never position the humidifier immediately downstream of a housed fan or blow-thru coil module. Additional dispersion distance may be needed if the humidifier is placed upstream of a final filter. To prevent condensation formation, the relative humidity leaving the humidifier should not exceed 83 percent. Table A-5 — T-Series Humidification Module Requirements Unit Size 3 6 8 10 12 14 17 21 Maximum Capacity (lbs./hr) 50 85 95 125 200 215 320 410 at 10 to 30 psig Humidifier Module Size Medium Medium Medium Medium Medium Medium Medium Medium Dispersion Space Module Size Medium Medium Medium Medium Medium Medium Medium Medium Unit Size 25 30 35 40 50 66 80 100 Maximum Capacity (lbs./hr) 510 600 740 775 775 775 775 775 at 10 to 30 psig 850 (1) 1090 (2) 1575 (2) 1620 (1) 1620 (1) 1575 (3) 1620 (3) Humidifier Module Size Medium Medium Medium Medium Small Small Small Small Dispersion Space Module Size Medium Medium Medium Medium Small Small Qty 2 Qty 2 Small (4) Small (4) (1) 15 to 30 psig (2) 15 psig (3) 20 or 30 psig (4) One small module upstream of humidifier and one small module downstream of humidifier module. 24 Table A-5 lists the modules required to both house the humidifier and dispersion space and maximum capacity of the humidifier at nominal cfm, and 10 to 30 psig steam pressure. A drain pan and an external piping cabinet is required on the module housing the humidifier and can be added to the dispersion space module, when specified. An optional access door can be added when specified to the dispersion space module.
Applications T-Series Humidifier Piping Locations – Sizes 3 to 66 * = 1 /2” for Size 3 T-Series Humidifier Piping Locations – Sizes 80 and 100 25 * Table A-6 – Humidifier Dimensions Sizes 3 to 66 Unit Size M G F C L 3 15½ 9 3½ 15¾ 31 6 15½ 9 6 18 31 8 15½ 9 93 /8 21 31 10 15½ 9 77 /8 21 31 12 15½ 9 67 /8 271 /8 31 14 15½ 9 77 /8 271 /8 31 17 15½ 9 67 /8 33 31 21 15½ 9 61 /8 39 31 25 15½ 9 63 /8 45 31 30 15½ 9 63 /8 45 31 35 16 9 9 507 /8 32 40 16 9 9 507 /8 32 50 14½ 7½ 11 567 /8 29 66 14½ 7½ 197 Note: /8 68¾ 29 1. All dimensions are in inches Table A-7 – Humidifier Dimensions Sizes 80 to 100 Unit Size L C 80 43½ 14½ 100 Note: 43½ 14½ All dimensions are in inches
Page 1 and 2: CLCH-DS-9 T-Series Climate Changer
Page 3 and 4: 3 Contents Features and Benefits 4
Page 5 and 6: Ultra-low-leak dampers are standard
Page 7 and 8: Optimized Coils Flexibility also ch
Page 9 and 10: Removing Airborne Contaminants Effe
Page 11 and 12: Mix and Recirculate Air to the Occu
Page 13 and 14: Barometric Relief Economizer Figure
Page 15 and 16: Applications Water Management Cooli
Page 17 and 18: Sound Power, Lw dB 100 90 80 70 60
Page 19 and 20: Although they offer fewer options t
Page 21 and 22: Humidification Section ASHRAE Stand
Page 23: Applications Outside Air Inlet Hood
Page 27 and 28: Applications HEPA Filter Module Arr
Page 29 and 30: All T-Series Climate Changer ® air
Page 31 and 32: Quick Select Table Q-4 — Section
Page 33 and 34: Quick Select 21 25 30 35 40 50 66 8
Page 35 and 36: Unit Sizes 35 Size 03 Table 3-4 —
Page 37 and 38: Table 6-4 — Unit Pressure Drops (
Page 39 and 40: Unit Sizes 39 Size 08 Table 8-4 —
Page 41 and 42: Unit Sizes 41 Size 10 Table 10-4
Page 67 and 68: General Data T-Series Perforated Do
Page 69 and 70: General Data Table G-6 - Back Traq
Page 71 and 72: General Data Table G-9 — Shipping
Page 73 and 74: General Data Table G-12 — UF Refr
Page 75 and 76:
General Data Table G-14 — Type F
Page 77 and 78:
General Data Table G-16— Type F C
Page 79 and 80:
General Data Table G-18 — Type F
Page 81 and 82:
Jobsite Connections TSC Economizer
Page 83 and 84:
Jobsite Connections TSC Front Plenu
Page 85 and 86:
Jobsite Connections TSC Q-Fan Note:
Page 87 and 88:
Jobsite Connections TSC Mixing Box
Page 89 and 90:
Jobsite Connections Electrical Loca
Page 91 and 92:
Jobsite Connections Table JC-2 and
Page 93 and 94:
e Vaneaxial Fans — Fan shall be a
Page 95 and 96:
Traq Dampers — Airflow Monitoring
show all

T-Series Climate Changer ® Air Handlers Sizes 3 through ... - Trane

Create successful ePaper yourself

Delete template?

Save as template?