T-Series Climate Changer ® Air Handlers Sizes 3 through ... - Trane

Design Advantages
Form and Function
The T-Series Climate Changer ® air
handler’s form is the result of extensive
evaluation of both customer needs and
the requirements of an outdoor unit.
Trane designed a unit roof that is
positively sloped and overhangs all
four sides of the air handler. This allows
for complete water drainage (no
rust-promoting puddles), while the
overhang keeps hard-driving rain away
from the top of the access doors. To
further improve integrity, all unit joints
are sealed and fastened with a
galvanized steel joint strip.
Galvanized steel joint strip between two
roof sections of the T-Series Climate
Changer.
The T-Series door utilizes a newly
designed latch with a single handle.
This allows for easier access, while
helping ensure a positive seal across
the entire door frame in both draw-thru
and blow-thru applications.
Access door with surface-mounted single
handle door latch and tempered glass
window.
Features
and
Benefits
The TSC’s handle is surface-mounted,
rather than piercing through the door,
eliminating the possibility for water
entry and improving the thermal
performance of the door. The latching
mechanism is equipped with features
that meet OSHA safety requirements,
and can be locked to limit entry.
When installed on a roof curb, the
T-Series Climate Changer air handler
becomes an integral part of the roof.
The inverted U-channel that forms the
base of the unit rests on a gasketed
roof curb, reducing the chance of
leakage.
Unit Construction
Another advantage of the T-Series
Climate Changer air handler is its
phosphatized, galvanized steel
“formulated panels” with rigid,
closed-cell insulation. This allows for
fewer seams, while providing the unit
with unsurpassed panel strength and
deflection resistance. The TSC is
capable of operation at static pressures
of +6/ -4", while the closed-cell
insulation provides an R-value of 12 as
standard!
Versatility Is Standard
The T-Series Climate Changer air
handler is one of the industry’s most
versatile, cataloged rooftop air
handlers. Trane can provide options to
meet almost any need in an outdoor
central station air handler, and with
standard product options.
Standard TSC Features:
• heavy-duty, unitized construction
• closed-cell insulation with R-value up
to 12
• pitched, double-wall roof
• double-wall interior panels
• solid, galvanized steel floor
• double-wall doors with a new
“single-handle” design
• insulated, galvanized or stainless steel
drainpans pitched in two-planes to
help ensure positive drainage
• ultra low-leak dampers
• inlet hood with moisture eliminator
• exhaust hood
• painted external unit casing in
accordance with the ASTM B117
salt-spray test
6
Trane offers a wide variety of fans and
motors, all available with factory-mounted
controls.
Choice of Fans
An extensive array of fan types and
options, including inlet guide vanes
and variable frequency drives for
modulation in variable air volume
systems, further enhances the TSC’s
versatility. Trane offers a wide variety of
fans and motors, all available with
factory-mounted controls.
Now you can choose the fan that best
satisfies each job’s supply, exhaust or
return fan needs:
• double-width/double-inlet (DWDI)
centrifugal fans in forward-curved (FC),
backward-inclined (BI) or airfoil (AF)
configurations
• single-width/single-inlet (SWSI) plug
fans
• airfoil vaneaxial fans (Model Q )
Each fan is rated in accordance with
ARI Standard 430 to ensure cataloged
performance. All DWDI fans are ARI
Standard 430 certified.