Split System Cooling Units - Trane

The Trane reputation for quality and
reliability in air conditioning is apparent
with Odyssey light commercial
split systems. These Trane systems
are designed to meet your job
requirements every time...and at a
competitive price.
Odyssey has Trane quality and reliability
built-in; couple that with outstanding
efficiency, flexibility and
installation ease and you have an
unbeatable combination for years of
worry-free service and operation.
Manufacturing Control
Trane’s exclusive control over the
design and manufacturing of all major
components is unique in the industry.
This approach assures us total control
over both the quality and reliability of
these components. And allows us to
custom match components to deliver
the best in split system performance.
Introduction
Split System Heat Pump Units . . .
Designed With Your Needs In Mind.
Designing the Details
Careful attention was given to designing
the details — from control wiring
to the access panels. Odyssey units
feature time-saving colored and numbered
wiring and removable panels
which allow complete access to all
major components and controls. All
outdoor units feature external high
and low pressure switches for easy
diagnosing and servicing of the unit.
Service valves with gauge ports are
provided on all units.
Standardized Cabinets
In addition, all cabinets have been
standardized. When you are servicing
an outdoor unit or an air handler, all
components are in the same location
from unit to unit.
Filters
The 5, 7½ and 10 ton air handlers are
supplied with 1" throwaway filters as
standard. The filter racks were
designed to easily convert for installation
of 2" filters. The 15 and 20 ton air
handlers have 2" filters as standard.
UL Listed and ARI Certified
Trane meets or exceeds all nationally
recognized agency safety and design
standards. Each condensing unit is UL
designed, approved and labeled in accordance
to UL Standards: UL 1995 for
central cooling air conditioners, refrigeration
and air conditioning condensing
and compressor units. Each air
handler is designed, approved and labeled
in accordance to UL 465 and UL
1995 standard for heat pumps. Each
unit is certified in accordance with ARI
Standard 340/360 or 365.
©2004 American Standard Inc. All rights reserved. SS-PRC002-EN