Split System Cooling Units - Trane
Split System Cooling Units - Trane
Split System Cooling Units - Trane
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Application of this product should be<br />
within the catalogued airflow and performance<br />
considerations.<br />
Clearance Requirements<br />
The recommended clearances identified<br />
with unit dimensions should be<br />
maintained to assure adequate serviceability,<br />
maximum capacity and<br />
peak operating efficiency. Actual<br />
clearances which appear inadequate<br />
should be reviewed with the local<br />
<strong>Trane</strong> Representative.<br />
180° Blower Rotation<br />
The 5, 7½, and 10 ton air handler blower<br />
section can be rotated 180° to<br />
change the discharge pattern. This<br />
modification must be done in the field<br />
and requires an addition of kit. See<br />
unit installer's guide.<br />
Application<br />
Considerations<br />
Low Ambient<br />
<strong>Cooling</strong><br />
As manufactured,<br />
these units<br />
can operate to<br />
50° F in the cooling<br />
mode of operation.<br />
An<br />
accessory head<br />
pressure control<br />
will allow operation<br />
to 0° F outdoor<br />
ambient. When<br />
using these units with<br />
control systems such<br />
as bypass changeover<br />
Variable Air Volume,<br />
make sure you consider the<br />
requirement for a head pressure<br />
control to allow low ambient<br />
cooling.<br />
Typical <strong>Split</strong> <strong>System</strong> Application<br />
Typical Horizontal Air Handler Application Typical Vertical Air Handler Application<br />
8 SS-PRC002-EN