VS_2017

Electronic Ballasts for TC and T Lamps
WARMSTART,
DIMMABLE AND
INSTANT START
ELECTRONIC BALLASTS
Operating fluorescent lamps with electronic ballasts yields numerous
advantages with regard to efficiency and convenience. Further details
are provided on the respective product pages and the technical
appendix.
The brightness of fluorescent lamps can also be regulated with the
help of dimmable electronic ballasts. Adjusting lamp wattage leads to
a further reduction of energy consumption and of the associated costs.
The corresponding ELXd units from Vossloh-Schwabe enable conventional
1–10 V control units to be connected via a bipolar 1–10 V
dimmer interface.
Moreover, Vossloh-Schwabe's product range also contains
electronic ballasts that can be dimmed using conventional light
sensors or polarity-independent dimmer interfaces via DALI-compatible
control units. Both interfaces (1–10 V and DALI) were developed in
accordance with EN 60929. Under consideration of the maximum
current of the respective control unit, it is also possible to operate
several electronic ballasts in parallel.
120