TRANSDEV CATALOGUE 2018 MARCH.pdf

BRECO® SELF TRACKING
Polyurethane Timing, Conveying and Indexing Belts
Self Tracking Belt Types
Self-tracking Belts come from the well known BRECO®,
BRECOFLEX® TIMING BELT range. They are made with
high tensile Steel cord tension members. The standard
version of the self-tracking timing belt is a combination
of two materials:
Wear resistant Polyurethane
•
High tensile Steel cord tension members
BAT10 and BAT15
Reduced polygonal effect
• Reduced vibration
Revolutionary new curved tooth design
Reduced noise due to overlapping tooth engagement
Same power transmission as an AT10 belt
SFAT10, SFAT15 and SFAT20
No flanges required
Teeth on each side are displaced by half a tooth
Reduced polygonal effect
• Reduced noise
TK
and ATK
•
Used where large lateral forces are present
No flanges required
Same power transmission as T or AT
102