TRANSDEV CATALOGUE 2018 MARCH.pdf

FERROPAN ® PU V BELTS
Steel Reinforced Friction Belts
FERROPAN ® Truly Endless
Standard
h
b
Steel Strand
hw
h
α
α
b
Steel Strand
t
Steel Strand
d
Polyurethane
d
Polyurethane
h
hw
Steel Strand
hw
h
hw
t
d
Polyurethane d Polyurethane
Truly Endless
Type FLEX
(continuous tension member)
Profile13 Profile 17 Profile 20 Profile 30 Profile 32 Flat belt (30 x 6)
Min. length Lw ±0.125% (mm) 2500 2500 2500 2500 2500 2000
Width b ±0.25 (mm) 13 17 20 30 32 30
Height h ±0.25 (mm) 6.5 11 10 15 20 6
Angle α 38° 38° 38° 38° 38° 90°
hw (mm) 3.25 4 5 9 8 3.7
Pitch t 8 10 10 15 15 10
Steel cord Ø (mm) d 0.9-E 1.2 1.2 2.5 2.5 0.6
For applications without reverse belt bending
Min. pulley Ø (mm) 75 110 100 200 200 75
For applications with reverse belt bending
Min. Ø inside V pulleys (mm) 100 160 150 250 250 100
Min. Ø outside flat pulleys (mm) 150 210 200 400 450 150
Max. working tensile load (N) 1000 1600 1600 3300 3300 1200
Breaking load (N) 3900 6400 6400 13200 13200 4800
Elongation @ max tensile (N) 0.40% 0.40% 0.40% 0.40% 0.40% 0.40%
Friction value µ on dry Steel 0.7 0.7 0.7 0.7 0.7 0.7
Temp. range °C -40 to +80 -40 to +80 -40 to +80 -40 to +80 -40 to +80 -40 to +80
Oil and fat resistance Very good Very good Very good Very good Very good Very good
Tear and abrasion resistance Very good Very good Very good Very good Very good Very good
Approx. weight in kg/m 0.1 0.22 0.25 0.58 0.75 0.24
264
24hr Breakdown available Customisable product Product code builder Compatible product
XX
XX