TRANSDEV CATALOGUE 2018 MARCH.pdf

BRECO® SELF TRACKING
Polyurethane Timing, Conveying and Indexing Belts
ATK10 K6 BRECO® Open Length (M)/Joined (V)
103 276
Polyurethane, Steel reinforced, extruded open length & joined - High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking.
Standard
Standard
ATK10K6
K6 GUIDE SECTION
BRECO® timing belts ATK10K6
•
•
Polyurethane, Steel reinforced, joined &
open length belting
High Power AT Profile in metric pitch with
trapezoidal toothform, self-tracking
Available types for ATK10K6:
Single sided
Nylon tooth facing (PAZ)
Nylon back facing (PAR)
•
Nylon both facing (PAZ/PAR)
Special Polyurethanes upon request
Antistatic, coloured, machined,
ground and punched belts
Technical Specification
ATK10K6 – Allowable tensile load by belt width
Belt width b (mm) 50
Tension member loadings
M 7500
V 3750
Belt widths (mm) – Further belt widths on request
ATK10K6 (M/V)
50
Standard delivery lengths (M)
Cut to lengths/lengths > 100m
Minimum length joined (V)
Available lengths
and versions
Rolls of 50 or 100m
On request
880mm
Standard material TPUST1 1)
Steel tension member (standard)
E tension member -
Stainless Steel tension member
PAZ
PAR
PAZ-PAR
DL/DL-PAZ -
DR/DR-PAZ -
T/T-PAZ -
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
- Not available
1) Further materials on request
Drive Type A
Type A
ATK10K6
Z min 20
d min 60
x
o
x
x
x
Drive Type B
Type B
ATK10K6
Z min 25
d min 120
Belt weight kg/m 0.302
Z min
d min
Z min
dmin
Z min
= Minimum number of teeth. d min
= Minimum diameter (mm)
108
24hr Breakdown available Customisable product XX Product code builder XX Compatible product