TRANSDEV CATALOGUE 2018 MARCH.pdf

BRECO® SELF TRACKING
Polyurethane Timing, Conveying and Indexing Belts
TK10K13 BRECO® Open Length (M)/Joined (V)
103 276
Polyurethane, Steel reinforced, extruded open length & joined - T Profile in metric pitch with trapezoidal toothform, self-tracking.
Standard
Version T
Standard
TK10K13
TK10K13-T
K13 GUIDE SECTION
Available types for TK10K13
• Standard single sided
Nylon tooth facing (PAZ)
•
Standard Plus extra accuracy versions
from 1500 to 12,000mm
E: with E-tension members for increased flexibility
Available with Stainless Steel tension members*
Special Polyurethanes upon request
Antistatic, coloured, machined,
ground and punched belts
• Backings
Please note :
• On 75 & 100 wide belts tracking guide will not be
cogged unless requested
Lengths in multiples of 1 tooth available*
Belts over 20,000mm long on request
• *Minimum quantities may apply
Belt widths (mm)
Intermediate belt widths on request
32 50 75 100
TK10K13 (M/V)
Standard delivery lengths (M)
Cut to lengths/lengths > 100m
Minimum length joined (V)
Available lengths
& versions
Rolls of 50 or 100m
On request
1,000mm
Standard material TPUST1 1)
Steel tension member (standard)
E tension member -
Stainless Steel tension member
PAZ
PAR
PAZ-PAR
DL/DL-PAZ -
DR/DR-PAZ -
T/T-PAZ
x Available
o Minimum purchase amount on request
- Not available
1) Further materials on request
x
o
x
x
x
o
Technical Specification
TK10 K13 – Allowable tensile load by belt width
Belt width b (mm) 32 50 75 100
Tension member
loadings F adm (N)
M 2600 4200 5200 8400
V 1300 2100 2600 3300
Belt weight kg/m 0.282 0.407 0.569 0.735
Drive Type A
Type A TK10K13 TK10K13-T
Z min 25 25
d min 80 80
Drive Type B
Type B TK10K13 TK10K13-T
Z min 25 25
d min 80 80
Z min
d min
Z min
d min
Z min
= Minimum number of teeth. d min
= Minimum diameter (mm)
116
24hr Breakdown available Customisable product XX Product code builder XX Compatible product