TRANSDEV CATALOGUE 2018 MARCH.pdf

BRECOFLEX® - T SERIES
Polyurethane Timing, Conveying and Indexing Belts
T10 BRECOFLEX®
46 299
Polyurethane, Steel reinforced, extruded truly endless, standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform.
Standard Double-sided Reinforced back of the belt Version T
T10 T10- DL T10- DR T10- T
Available types for T10:
Single-sided
Single sided with E tension members
Special Polyurethanes upon request
Nylon tooth facing (PAZ)
Antistatic, coloured, machined, ground and punched belts
• Clamp plates and end connections
Standard lengths (mm)/Number of teeth
Length
No.
No.
Length
teeth
teeth
500 50 970 97
530 53 980 98
560 56 990 99
600 60 1010 101
610 61 1080 108
630 63 1150 115
660 66 1210 121
690 69 1240 124
700 70 1250 125
720 72 1320 132
780 78 1350 135
810 81 1390 139
840 84 1400 140
880 88 1420 142
890 89 1460 146
920 92 1500 150
960 96 1560 156
Technical Specification
Length
No.
teeth
1610 161
1750 175
1780 178
1880 188
1960 196
2250 225
2360 236
2500 250
2650 265
2800 280
3000 300
3100 310
3150 315
3350 335
3750 375
4000 400
4250 425
Length
No.
teeth
4500 450
4750 475
5000 500
5300 530
5600 560
6000 600
6300 630
6700 670
7100 710
7500 750
8000 800
9000 900
T10 – Allowable tensile load by belt width
Belt width b (mm) 16 25 32 50 75 100
Tension member
loadings
F adm (N) 1000 1800 2300 3800 5800 7800
Standard kg/m 0.068 0.140 0.145 0.227 0.341 0.454
Belt DL kg/m 0.090 0.143 0.183 0.228 0.432 0.577
weight DR kg/m 0.119 0.185 0.237 0.372 0.558 0.795
T kg/m 0.107 0.170 0.217 0.342 0.513 0.685
Belt widths (mm)
Intermediate belt widths on request
16 25 32 50 75 100
T10 BFX
Standard lengths
Type B T10 DL DR T
Z min 20 20 20 20
d min 60 60 80 80
Available lengths & versions
See table on the left
Minimum purchase amount up to 700mm 1 sleeve
Any number of teeth
available from
720mm up to 22,000mm
Intermediate lengths from 720mm o
Standard Plus version
Over 22,000mm
Standard material
Steel tension member
(standard)
E tension member
Stainless Steel
tension member
PAZ
720mm up to 22,000mm
up to 700mm
On request
TPUST3
from 720mm TPUST1 1)
DL/DL-PAZ from 900mm o
DR/DR-PAZ from 900mm o
T/T-PAZ
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
- Not available
1) Further materials on request
Drive Type A
Type A T10 DL DR T
Z min 12 20 20 20
d min 60 60 60 60 d min
Drive Type B
Z min
Z min
x
o
o
x
o
d min
Z min
= Minimum number of teeth. d min
= Minimum diameter (mm)
56
24hr Breakdown available Customisable product XX Product code builder XX Compatible product