TRANSDEV CATALOGUE 2018 MARCH.pdf

SEARCH
BACK TO MAIN CONTENTS
- IMPERIAL SERIES
Polyurethane Timing, Conveying and Indexing Belts
T1/2" (H) BRECOFLEX®
76
362 & 378
Polyurethane, Steel reinforced, extruded truly endless. Classic imperial pitch with trapezoidal toothform.
Standard Double-sided Reinforced back of the belt Version T
Other Belts
40°
2,0
2.18
40°
2.18
2.18
40°
2.18
4.2
40°
2.18
2
2
12.7
12.7
12.7
12.7
T1/2" (H) T1/2" (H) DL T1/2" (H) DR T1/2" (H) T
Available types for T1/2" (H)
Single sided
Nylon tooth facing (PAZ)
•
Special Polyurethanes upon request
Antistatic, coloured, machined, ground and punched belts
BRECOFLEX®
Standard stock lengths (mm)/Number of teeth
Type Length No. teeth
420 H 1066,80 84
450 H 1143,00 90
480 H 1219,20 96
510 H 1295,40 102
540 H 1371,60 108
570 H 1447,80 114
600 H 1524.00 120
630 H 1600.20 126
660 H 1676.40 132
700 H 1778.00 140
750 H 1905.00 150
800 H 2032.00 160
Type Length No. teeth
850 H 2159.00 170
900 H 2286.00 180
1000 H 2540.00 200
1100 H 2794.00 220
1250 H 3175.00 250
1400 H 3556.00 280
1700 H 4318.00 340
2000 H 5080.00 400
2300 H 5842.00 460
2600 H 6604.00 520
3000 H 7620.00 600
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
- Not available
1) Further materials on request
Technical Specification
T1/2" (H) – Allowable tensile load by belt width
Belt width b (mm) 12.7 19.1 25.4 38.1 50.8 76.2 101.6
Tension member
loadings
Belt weight
(kg/m)
F adm (N) 800 1300 1800 2800 3800 5800 7900
H 0.053 0.079 0.108 0.161 0.216 0.324 0.432
H-DL 0.064 0.097 0.130 0.196 0.262 0394 0.527
H-DR 0.085 0.128 0.171 0.258 0.345 0.518 0.692
H-T 0.082 0.124 0.165 0.249 0.333 0.499 0.668
Preferred belt widths (mm)
Intermediate and larger width upon request
12.7 19.1 25.4 38.1 50.8 76.2 101.6
1/2" 3/4" 1" 1.5" 2" 3" 4"
T1/2"H BFX
Standard stock lengths
Any number of teeth
available from
Available lengths
and versions
See table on left
723.9mm up to
16,002mm
Intermediate lengths from 723.9mm o
Standard Plus version
Over 16,002mm
723.9mm up to 16,002mm
On request
Standard material from 723.9mm TPUST1 1)
Steel tension member
(standard)
Drive Type A
E tension member -
Stainless Steel
tension member
PAZ
DL/DL-PAZ from 901.7mm o
DR/DR-PAZ from 901.7mm o
T/T-PAZ
Type A T1/2 (H) DL DR T
Z min 20 20 20 20
d min 60 60 80 80
Drive Type B
Type B T1/2 (H) DL DR T
Z min 20 20 20 20
d min 80 80 80 80
Z min
Z min
x
-
x
o
d min
d min
Z min
= Minimum number of teeth. d min
= Minimum diameter (mm)
T +44 (0)1202 675 555 F +44 (0)1202 677 466 E sales@transdev.co.uk
transdev.co.uk
83