TRANSDEV CATALOGUE 2018 MARCH.pdf

BRECO® - IMPERIAL SERIES
Polyurethane Timing, Conveying and Indexing Belts
T3/8" (L) BRECO® Open Length (M)/Joined (V)
76
359 & 375
Polyurethane, Steel reinforced, extruded open length & joined. Classic imperial pitch with trapezoidal toothform.
Standard
50°
1.85
1.7
9.525
T3/8" (L)
BRECO® timing belts T3/8" (L)
• Polyurethane, Steel reinforced, joined & open length belting
Available types for T3/8" (L):
Single sided
Nylon tooth facing (PAZ)
Nylon back facing (PAR)
•
Nylon both facing (PAZ/PAR)
Special Polyurethanes upon request
Antistatic, coloured, machined, ground and punched belts
Drive Type A
Z min
Type A
T3/8" (L)
Z min 15 (20)
d min 60
d min
Drive Type B
Z min
Type B
T3/8" (L)
Z min 20 (25)
d min 60 (80)
d min
Z min
= Minimum number of teeth. d min
= Minimum diameter (mm)
Values in brackets apply to joined timing belts.
Belt widths (mm)
Intermediate belt widths on request
9,53 12,7 19,1 25,4 38,1 50,8 76,2
3/8" 1/2" 3/4" 1" 1.5" 2" 3"
T3/8" (M/V)
Standard delivery lengths (M)
Cut to lengths/lengths > 100m
Minimum length joined (V)
x Available
o Minimum purchase amount on request
- Not available
1) Further materials on request
Available lengths
and versions
Rolls of 50 or 100m
On request
880mm
Standard material TPUST1 1)
Steel tension member (standard)
E tension member -
Stainless Steel tension member -
PAZ
PAR
PAZ-PAR
DL/DL-PAZ -
DR/DR-PAZ -
T/T-PAZ -
x
x
x
x
Technical Specification
T3/8" (L) – Allowable tensile load by belt width
Belt width b (mm) 9.53 12.7 19.1 25.4 38.1 50.8 76.2
Tension member loadings
M 630 840 1260 1680 2520 3500 5040
V 315 420 630 840 1260 1750 -
Belt weight kg/m 0.033 0.044 0.066 0.080 0.133 0.178 0.266
82
24hr Breakdown available Customisable product XX Product code builder XX Compatible product