TRANSDEV CATALOGUE 2018 MARCH.pdf

TRANSDEV SPECIAL BELTS
Transback Backed Belts
Materials
Transback bonded backings
Material
Backed belts description
Abrasion
resist
Coefficient
of friction
Temp
range
Stress
rating
NKR-38
This 95% natural rubber is the most common and versatile
backing material, with outstanding resilience and remarkable
cut and tear resistance. Excellent wet abrasion resistance.
5 0.7
+70°C
- 40°C
MSM
AbbrX-55
Silica reinforced natural and synthetic rubber mix, resilience
for severe abrasion resistance. Low compression set and high elasticity.
6 0.7
+70°C
- 40°C
HSM
Slipface
Low coefficient of friction, highly wear resistant
polymer fabric facing. For use on belts which are used as
accumulators or for BRECOFLEX® PAR options.
2 0.2
+80°C
- 30°C
HSM
Nitrisol-55
Oil, heat and aromatic hydrocarbon resistant solid rubber for
heavy duty traction and haul-off applications.
5 0.5
+80°C
- 20°C
HSM
UraSol-60
Yellow solid polyester Vulkollan® Polyurethane with
excellent wear and abrasion resistance. High co-efficient of friction
for haul-off or Form-Fill Sealing applications.
8 0.4
+80°C
- 50°C
HSM
UraSol-70
Solid Polyester Vulkollan® Polyurethane with oil, wear
and abrasion resistance. Excellent for pocketing, nesting and
profiling for precision indexing belts.
9 0.3
+80°C
- 50°C
HSM
UraSol-80
Solid Polyester Vulkollan® Polyurethane - excellent for machining
of pockets and profiles. Extremely wear resistant.
10 0.2
+80°C
- 50°C
HSM
FoodX-60
White Nitrile rubber suitable for most food and medical
use including fatty foods. Approved materials to FDA 177.2600.
Good heat ageing resistance.
4 0.7
+70°C
- 30°C
HSM
CorrX-40
Filled natural rubber, excellent for profiling and grooving. High tear
and abrasion resistance. High resilience and elasticity.
5 0.9
+70°C
- 50°C
MSM
SilicoSol-60
Silicon rubber with good release, wear, abrasion
and temperature resistance (+200°C) properties.
Non-toxic food and medical quality to FDA 177.2600.
7 0.4
+200°C
- 30°C
HSM
NeoCell
Closed cell Polychloroprene sponge. Good ageing, oil, compression
and chemical resistance and non-liquid absorbent.
Non flammable and self extinguishing.
2 0.9
+70°C
- 30°C
LSM
NeoCell-Plus
Higher density NeoCell. Good compression, ageing, oil
and chemical resistance and non-liquid absorbent.
Non flammable and self-extinguishing.
5 0.6
+70°C
- 30°C
MSM
AbbrX - HD70
Heavy duty natural and synthetic rubber mix for superior
strength and resilience for severe abrasion resistance.
Low compression set and high elasticity.
7 0.4
+70°C
- 40°C
HSM
Supergrip
PVC special profile with good resilience and
high wear resistance. Oil and fat resistant and especially
suitable for snack food conveying applications.
5 0.8
+80°C
- 20°C
MSM
PVC BLUE
Smooth PVC with exceptional grip and high wear resistance. Well suited to
conveying products with a smooth surface without slip.
5 0.9
+80°C
- 20°C
MSM
164