TRANSDEV CATALOGUE 2018 MARCH.pdf

SEARCH
BACK TO MAIN CONTENTS
GEARS & RACKS
Metric Racks
Metric Racks in Steel, on Imperial Bases 1.0 - 4.0 MOD, 20° P.A
625 - 639
A
B
hp
Metric Rack
L
Can be induction or flame hardened
• Intermediate sizes and special racks
to drawing
• Standards: to DIN 867, 3962, 3963,
Grade/Quality 9 or equivalent
• Standard tolerances, unless
otherwise stated ±0.25mm
All dimensions in mm
•
Steel EN8, (080M40, 080M46,
212A42), normalised or equivalent
Other Belts
Steel on imperial base
Code Pitch module Width B Height A Height to pitch line hp Length L
SR10/12.7/.5 1 12.7 12.7 11.7 500
SR10/12.7/1 1 12.7 12.7 11.7 1000
SR12.5/12.7/.5 1.25 12.7 12.7 11.45 500
SR12.5/12.7/1 1.25 12.7 12.7 11.45 1000
SR15/19/.5 1.5 19.05 19.05 17.55 500
SR15/19/1 1.5 19.05 19.05 17.55 1000
SR15/19/2 1.5 19.05 19.05 17.55 2000
SR20/19/.5 2 19.05 19.05 17.05 500
SR20/19/1 2 19.05 19.05 17.05 1000
SR20/19/2 2 19.05 19.05 17.05 2000
SR25/25.4/.5 2.5 25.4 25.4 22.9 500
SR25/25.4/1 2.5 25.4 25.4 22.9 1000
SR25/25.4/2 2.5 25.4 25.4 22.9 2000
SR30/31.7/.5 3 31.75 31.75 28.75 500
SR30/31.7/1 3 31.75 31.75 28.75 1000
SR30/31.7/2 3 31.75 31.75 28.75 2000
SR40/38/.5 4 38.1 38.1 34.1 500
SR40/38/1 4 38.1 38.1 34.1 1000
SR40/38/2 4 38.1 38.1 34.1 2000
Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.
For special or reworked racks please contact our Manufacturing Department for a quotation.
T +44 (0)1202 675 555 F +44 (0)1202 677 466 E sales@transdev.co.uk transdev.co.uk 681