TRANSDEV CATALOGUE 2018 MARCH.pdf

SEARCH
BACK TO MAIN CONTENTS
PULLEYS
Drive Designs Program
Mulco belt-pilot
Mulco belt-pilot is an interactive online application
that helps you quickly and accurately design and specify
your belting solution. You can determine the number of
teeth, plan the width of belts or calculate the diameter
of timing pulleys.
The calculation results achieved with the Mulco
belt-pilot are valid for BRECO®, BRECOFLEX® and
CONTI® SYNCHROFLEX, including GEN III, Polyurethane
timing belts. Both Rotary and Linear power drive designs
are covered.
Other Belts
Rotary power drive design features
• Provides shaft centre positions when choosing
pulley sizes and preferred belt lengths
• Enables design of two pulley or multi-pulley
'serpentine' drives
•
Provides power and torque capacity
of the chosen belt, at the given rpm
Linear power drive design features
• Provides moving carriage linear slide
design for reciprocating movement
• Enables design of open and closed vertical
linear drives, with or without counterweights
• Design for Linear trolleys, utilising 'Omega'
drive geometry
•
Gives the Linear force capacity of the
chosen belt, at the given linear velocity
General features
• •
Details safety factors for tensile strength
and tooth shear strength
Provides precise figures for correct belt pretension
Printed results, including graphics of
the data and chosen components
Mulco belt-pilot is available via our web site www.transdev.co.uk and you will need to register the first time you use it.
Please note that the calculation results for the pitch diameter of the pulleys represent actual values.
T +44 (0)1202 675 555 F +44 (0)1202 677 466 E sales@transdev.co.uk transdev.co.uk 275