TRANSDEV CATALOGUE 2018 MARCH.pdf

SEARCH
BACK TO MAIN CONTENTS
BRECO® - ATN SERIES
Polyurethane Timing, Conveying and Indexing Belts
BRECO® Mechanical Joint System
The BRECO® mechanical joint system gives the designer ever
more versatility in the design and development of modular
conveying systems. The BRECO® mechanical joint comprises of
a prepared, finger Joined belt to the required length, a number
of tooth clamps, matching top plates and the screws to join the
whole system together.
The system can be used on ATN10, ATN12.7 pitches and on belt
widths from 50mm wide to 100mm wide. All joint parts can be
of food quality materials if necessary. Top plates can be replaced
with normal full width ATN profiles wherever required.
Other Belts
Mechanical joint type ‘C’
Joint length = 10 teeth = 9 pitches
•
Tooth thickness at joint of belt = + 0.9mm
Belt teeth machined for connecting bars
Back plates screw on the back of the belt
Profiles cannot be mounted over the joint
Mechanical Joint type ‘DC-PRO’
• Belt teeth and back machined for
connecting bars and back plates
Joint length = 10 teeth = 9 pitches
• Profiles can be mounted over the joint
Back plates countersunk into the back of the belt
Mechanical joint type ‘DC’
• Belt teeth and back machined for
connecting bars and back plates
Joint length = 10 teeth = 9 pitches
•
Overall belt thickness increases by + 0.9mm
Back plates countersunk into the back of the belt
Belt widths (mm) with
available mechanical joints
Belt width 50 75 100
T10, AT10,
ATN10,
ATN10K6
C, DC
DC-PRO
C, DC
DC-PRO
C, DC
DC-PRO
ATN12.7
ATN12.7K6
C, DC
DC-PRO
C, DC
DC-PRO
C, DC
DC-PRO
ATN20
C, DC
DC-PRO
C, DC
DC-PRO
C, DC
DC-PRO
• Profiles cannot be mounted over the joint 133
ATNS20
C, DC
DC-PRO
C, DC
DC-PRO
-
-
T +44 (0)1202 675 555 F +44 (0)1202 677 466 E sales@transdev.co.uk
transdev.co.uk