TRANSDEV CATALOGUE 2018 MARCH.pdf

SEARCH
BACK TO MAIN CONTENTS
TRANSDEV SPECIAL BELTS
Transback Backed Belts & Endless Backing
Materials
Transback bonded backings Contd.
Material
FoamX-LD
Backed belts description
Low density sponge open cell natural rubber
for excellent resilience. High elasticity and porosity.
Abrasion
resist
Coefficient
of friction
1 0.7
Temp
range
+60°C
- 30°C
Stress
rating
XLSM
Other Belts
UraFoam - 35
Polyurethane foamed elastomer with micro
cellular construction. Excellent wear resistance.
1 0.6
+90°C
- 20°C
LSM
UraCell-LD
Low density partially closed cell elastomer for conveying delicate items.
Good oil, grease, solvent and general chemical resistance.
1 0.6
+80°C
- 20°C
LSM
UraCell-MD
Medium density partially closed cell elastomer for
conveying delicate items. Good oil, grease, solvent
and general chemical resistance.
1 0.5
+80°C
- 20°C
LSM
UraCell-HD
High density mainly closed cell elastomer for conveying and transport.
Good oil, grease, solvent and general chemical resistance.
1 0.5
+80°C
- 20°C
MSM
UraCell-VHD
Very high density fully closed cell elastomer for conveying
delicate items. Good oil, grease, solvent and general
chemical resistance. High wear resistance.
5 0.3
+80°C
- 30°C
MSM
Transback endless backings
No overlap joint delamination, no adhesive layer to be attacked or degraded, no compromise on food quality or medical applications
Material
Endless backings description
Abrasion
resist
Coefficient
of friction
Temp
range
Stress
rating
ETC38NR
This 95% natural rubber has outstanding resilience and remarkable cut
and tear resistance. Excellent wet abrasion resistance.
5 0.7
+70°C
- 40°C
MSM
ETC60NR
Reinforced natural and synthetic rubber with superior strength and resilience
for severe abrasion resistance. Low compression set and high elasticity.
6 0.7
+70°C
- 40°C
HSM
ETC70NR
Heavy duty reinforced natural and synthetic rubber mix
with superior strength and resilience for severe abrasion
resistance. Low compression set and high elasticity.
7 0.4
+80°C
- 30°C
HSM
ETC50NBR-FG
White Nitrile rubber suitable for most food and medical use including
fatty foods. FDA Approved. Good heat aging resistance.
5 0.6
+80°C
- 60°C
MSM
ETC LXMR
This Synthetic rubber has outstanding resilience and remarkable
cut and tear resistance. Excellent wet abrasion resistance.
5 0.7
+70°C
- 40°C
MSM
ETX LXMB
Reinforced natural and synthetic rubber with superior strength
and resilience for severe abrasion resistance. Low compression
set and high elasticity.
7 0.7
+70°C
- 40°C
HSM
ETC-SIL-38
Silicon rubber with good release, wear/abrasion and temperature
resistance (+200°C) properties. Non-toxic food and
medical quality to FDA 177.2600.
7 0.4
+200°C
- 30°C
HSM
ETC-SIL-55
Silicon rubber with good release, wear/abrasion and temperature
resistance (+200°C) properties. Non-toxic food and
medical quality to FDA 177.2600.
7 0.4
+200°C
- 30°C
HSM
T +44 (0)1202 675 555 F +44 (0)1202 677 466 E sales@transdev.co.uk
transdev.co.uk
165